Bootable Linux USB stick: Difference between revisions

From CCP4 wiki
Jump to navigation Jump to search
No edit summary
Line 163: Line 163:


All other methods, like the <code>fstrim</code> command and the <code>discard</code> mount option '''do not work for USB sticks''', presumably because the usb-storage kernel module does not pass the ATA trim command through the USB bridge and controller to the device. The same goes for [http://unix.stackexchange.com/questions/97143/utility-to-trim-unallocated-space-on-drive <code>blkdiscard</code>].
All other methods, like the <code>fstrim</code> command and the <code>discard</code> mount option '''do not work for USB sticks''', presumably because the usb-storage kernel module does not pass the ATA trim command through the USB bridge and controller to the device. The same goes for [http://unix.stackexchange.com/questions/97143/utility-to-trim-unallocated-space-on-drive <code>blkdiscard</code>].
== installation of crystallographic software ==
* XDS and related programs (XDS-viewer, xdsstat, xdsgui, generate_XDS.INP): [http://strucbio.biologie.uni-konstanz.de/xdswiki/index.php/Installation#Linux see XDSwiki]
* CCP4: download and install from [http://www.ccp4.ac.uk/download/#os=linux CCP4 Hompage]
* PHENIX: download and install from [https://www.phenix-online.org/download/ Phenix-online]
* SHELX: download and install from [http://shelx.uni-ac.gwdg.de/SHELX/download.php SHELX Homepage] or together with [http://www.ccp4.ac.uk/download/#os=linux CCP4]
install required (+ additional) software from the Fedora repository
dnf -y install tcsh xterm tk qt-x11 xxdiff atop nedit lbzip2

Revision as of 12:14, 10 August 2017

We regularly and successfully use USB sticks for courses where participants bring their own notebooks. The big benefit is that students learn Linux, and realize that they can easily use the hardware they already own. Current notebook hardware is by far fast enough for data processing, structure solution and coot visualization. What we found:

  1. the sticks should be fast USB3 (very good results with SANdisk Extreme 32GB or bigger; physically small sticks like Kingston DataTraveler look nicer but are slow). The computers do not have to be recent, nor do they have to have USB3 ports. USB2 ports support up to 30MB/s, but only USB3 sticks deliver this! With a bit of tuning (below) the stick feels as fast as a local harddisk.
  2. we use Fedora 23 (and higher) because its hardware support is very good. We always use the 64bit distro.
  3. The stick can be booted on MacBooks as well (press the alt key at the boot sound); their hardware works well with Fedora. For Windows clients (press F11 or F12 or sometimes F9 or F10 for the boot menu; if that does not work press F2 or DEL for the BIOS menu and change the boot order), one has to make sure that "fast boot" (or "fast startup") is disabled (or Shift is pressed while shutting Windows down), and sometimes powercfg -H off (as Administrator in a console window) is additionally required; otherwise the USB stick may not boot. Occasionally we find a computer that does not boot from the stick because the BIOS screen can not be reached (due to unknown BIOS password; happens with machines belonging to institutions which administer them centrally) or some such, but 19 out of 20 work as they should.
  4. if the WiFi does not work out-of-the-box on MacBook Pro, connect temporarily to the Internet by other means (ethernet cable, WiFi via USB key, tether to your phone via Bluetooth), become root, and install the latest kernel and tools with dnf install -y akmods kernel kernel-devel broadcom-wl --best --allowerasing. After installing, reboot into the new kernel.
  5. we just install CCP4 and whatever else we need (XDS, Phenix, Chimera, ..), and then dd or ddrescue (on a machine with USB3 ports) an image of that stick to all other sticks.
  6. any number of bells and whistles could be added to this, like clients sending their hostnames to a server after booting, and accepting updates by rsync.

To make students familiar with the sticks and how to boot them, one needs 30+ minutes and a few tutors.

Some more details

  1. we always create a few-GB FAT32 partition because that makes file exchange with Windows and Macs very simple. The FAT32 partition should be the first partition on the stick; 2GB is enough for us. Then comes a biosboot partition (1MB; required for booting bios system from a GPT disk), an efi partition (e.g. 250MB; required for UEFI/EFI boot on PC's/MAC's) and the Linux partition, with 13.9GB, so that the sum of the four partitions is slightly below 16GB. The third partition is then a 16.1GB /data partition. This scheme has the advantage that the image of the stick can just as well be copied (with dd or better ddrescue) to a 16GB stick; the /data partition then does not fit and cannot be used on that stick, but the operating system will then work on the small stick just as well. This requires that the /data partition is not fsck'ed automatically from /etc/fstab (0 in the 6th field).
  2. it is a good idea to give easy root access to the one user you create because certainly some packages will have to be installed or updated when the stick is in use
  3. it is a good idea to save an image of the stick whenever you made a successful change; otherwise you might need to start from scratch if you mess something up.
  4. (if the installation not already does it for you) you should label the partitions and use the labels for mounting the partitions in /etc/fstab, alternatively use UUID's; don't use /dev/sda1 or the like because depending on the hardware it is booted on, after booting the stick, and depending on the actual hardware, the stick may be /dev/sdb or /dev/sdc or ... !


How to create a bootabled GPT-partitioned USB-stick with Fedora 23

This will create a USB stick capable to

  • EFI boot on Macs
  • UEFI boot on PCs
  • BIOS boot on newer hardware (legacy boot / CSM enabled in BIOS)
  • BIOS boot on medium aged hardware
  • not boot on really old BIOS hardware which doesn't support booting from GPT (see below)

GPT partition the stick using gdisk

The example shows a 32 GB Sandisk Extreme:

Part 1: +1G VFAT            (0700) (Windows needs it to be the first partition) 
Part 2: +1M BIOSBOOT        (ef02)
Part 3: +250M EFI           (ef00)
Part 4: +13500M /           (0083)
Part 5: +15000M /mnt/data   (0083)

For performance, make sure that the big partitions are aligned to 8192-sector boundaries; gdisk default is 2048-sector boundaries - the default can be adjusted. If you use the above sizes and the + sign for specifying them, this happens to work out automatically.

install Fedora23 on an UEFI machine (UEFI enabled ; LegacyBoot / CSM disabled)

Note: in the following, whenever you see the X in sdX, you must fill in the appropriate drive letter (e.g. a or b or c or d or ...).

sdX3: efi	       /boot/efi
sdX4: ext4             / 
sdX5: ext4             /mnt/data

Not much to say about the installation of programs (CCP4 ?, Phenix ?, XDS ?, ...?). You should also install the hfsplus-tools to enable Mac users to access their data on harddisk. Make sure to install the binutils RPM to get the "strings" and other useful GNU commands.

adjust the USB-stick for UEFI/EFI boot (before reboot from chroot environment)

chroot to the installed system:

chroot /mnt/sysimage

install Fedora updates:

dnf -y update    # dnf on FC23 is successor to yum


configure grub2 for (U)EFI systems:

  • disable auto recognition of other installed Operating systems (specific to current computer), and
  • update grub2-efi.cfg
echo 'GRUB_DISABLE_OS_PROBER=”true”' >> /etc/default/grub
grub2-mkconfig -o /etc/grub2-efi.cfg

(last step automatically puts UUID's to recognise the boot device in grub2-efi.cfg ; default after fresh Fedora installation is the device name which might be different on another computer)


Performance tuning (not strictly required):

We use ext4 filesystems and data=writeback,nobarrier in /etc/fstab. To be able to set these options also on the / filesystem, we use tune2fs to set both as default mount options on a Linux machine where the stick (dev/sdX) is just plugged in (i.e. not booted from):

tune2fs -o journal_data_writeback,nobarrier /dev/sdX4
tune2fs -o journal_data_writeback,nobarrier /dev/sdX5

create & label vfat filesystem:

mkfs.vfat /dev/sdX1
dosfslabel /dev/sdX1 VFAT

shutdown or reboot:

exit
systemctl poweroff (or reboot for testing)

Install grub2 for BIOS boot (from chroot environment)

boot Fedora Live DVD on a BIOS machine and chroot to the stick:

mount /dev/sdX4 /mnt
mount -o bind /dev /mnt/dev
mount -t proc /proc /mnt/proc
mount -t sysfs /sys /mnt/sys
chroot /mnt

install grub2 for BIOS boot and configure it:

rm /boot/grub2/grubenv
grub2-install /dev/sdX
grub2-mkconfig -o /etc/grub2.cfg

(on UEFI systems /boot/grub2/grubenv is a symlink to /boot/efi/EFI/fedora/grubenv (from package grub2-efi.rpm). The symlink has to be removed before grub2-install can finish successfully, it automatically creates a new file /boot/grub2/grubenv (as in package grub2.rpm)


check /etc/grub2.cfg and if needed, change at all positions: “linuxefi” to “linux16”, and “intrdefi” to “intrd16”

Problems on old BIOS hardware

Some old computers still might not boot since they don't support booting from GPT. This can be fixed to boot on such old hardware, however the stick afterwards cannot boot on EFI/UEFI systems anymore:

  • set the boot flag (active) on the single 0xEE partition in the protective MBR by using fdisk version <= 2.22 (versions 1.23 and newer have GPT support and thus don't make changes to the protective MBR but to the GPT) (I used fdisk (util-linux-ng 2.17.2) on a ScientificLinux 6.7 machine)
fdisk /dev/sdX
a
part 1
w
  • recompute CHS values using option “h” in gdisk's expert menu:
gdisk /dev/sdX
x
h
m
q

this can be reversed: - toggle bootflag off in old fdisk - recompute CHS values in gdisk

(using a sgdisk backup of the GPT should also be fine)

helpful links:

http://www.rodsbooks.com/gdisk/bios.html#bios --> option h of gdisks experts menu did the trick!

https://fedoraproject.org/wiki/GRUB_2?rd=Grub2#Updating_GRUB_2_configuration_on_BIOS_systems

generating images and copies of the stick

Save a compressed disk image - we use the parallel gzip program called pigz:

pigz -c < /dev/sdX > usbstick.img.gz

(time: ~180 secs speed: ~175MB/s, size of image: 1.8 GB) write compressed image back to a stick:

unpigz -c usbstick.img.gz > /dev/sdX

(speed: ~ 98MB/s)

For creation/maintainance a bunch of sticks, a multiple port USB-HUB is a very usefull tool. E.g. the Raid Sonic Icy Box IB-AC6113 accepts 12 Sandisk Extreme sticks at once (port 7 has to stay empty due to spatial restrictions) and all 12 stick are recognized by the OS (CentOS7).

for techies: taking care of the stick

The following is about performance and durability of the USB stick, and reading it is not required for the functionality described above. If you don't know what TRIM is and how it relates to flash media, this section is probably not for you.

To fill empty part of all partitions on the stick with “zeros”: for each partition, do (as root)

dd if=/dev/zero of=/mountpoint_of_partition/delete.me bs=10M  # this will stop when filesystem is full
rm /mountpoint_of_partition/delete.me

This could be done after deleting large amounts of data from the USB stick, and before saving and compressing an image of it. USB sticks that support “Deterministic read data after TRIM” should instead be TRIMmed (see below) because this does not wear out the storage cells.

Initializing the stick

hdparm's (ENHANCED) SECURITY ERASE initializes the whole stick in a few seconds, and restores it to an almost factory-fresh condition, including zeroing the device. This works on all sticks where hdparm -I /dev/sdX reports "supported: enhanced erase" but if used wrongly (e.g. on the wrong device, or with the wrong options, or ...) it may brick your device, or delete valuable data! So use at your own risk:

  • check if hdparm -I /dev/sdX reports "supported: enhanced erase" and "not frozen" (to unfreeze a frozen diks, suspend your system with pm-suspend and wake it up again)
  • set disk password, and erase it (which unsets the password):
hdparm --user-master u --security-set-pass Eins /dev/sdX
hdparm --user-master u --security-erase-enhanced Eins /dev/sdX

If you tried with --security-erase-enhanced, but the disk does not support it, then an error will occur and the disk will still be locked after the failed command, and you will not be able to write anything to it! If this happens, you can unlock it with

hdparm --user-master u --security-unlock Eins /dev/sdX

TRIMming the stick

TRIMming informs the USB stick firmware about blocks of the filesystem that do not contain file data. This is available for USB sticks for which hdparm -I /dev/sdX returns "Data Set Management TRIM supported"; if that command also returns "Deterministic read data after TRIM" then zeros are returned upon reads of TRIMmed blocks.

The wiper.sh script (part of the hdparm source distribution) TRIMs ext3/ext4/xfs filesystems, but does not reproducibly seem to work for the SanDisk Extreme 32GB stick if the filesystem is mounted. This is probably due to the fact that this stick has a limitation of max 65536 blocks in one TRIM command (https://sourceforge.net/p/hdparm/bugs/63/). Since wiper.sh also works for unmounted filesystems, and the mapping of unused space is then obtained with a different tool, one should try with an unmounted filesystem as well - this worked for us in all cases tried so far (tested with this script).

All other methods, like the fstrim command and the discard mount option do not work for USB sticks, presumably because the usb-storage kernel module does not pass the ATA trim command through the USB bridge and controller to the device. The same goes for blkdiscard.

installation of crystallographic software

install required (+ additional) software from the Fedora repository

dnf -y install tcsh xterm tk qt-x11 xxdiff atop nedit lbzip2