Bootable Linux USB stick
We regularly and successfully use USB sticks for courses where participants bring their own notebooks. The big benefit is that students learn Linux, and realize that they can easily use the hardware they already own. Current notebook hardware is by far fast enough for data processing, structure solution and coot visualization. What we found:
- the sticks should be fast USB3 (very good results with SANdisk Extreme 32GB; physically small sticks like Kongston DataTraveler look nicer but are slow). The computers do not have to be recent, nor do they have to have USB3 ports. USB2 ports support up to 30MB/s, but only USB3 sticks deliver this! With a bit of tuning (below) the stick feels as fast as a local harddisk.
- we use Fedora 23 because its hardware support is very good. We always use the 64bit distro.
- The stick can be booted on MacBooks as well (press the
altkey at the boot sound); their hardware works well with Fedora 23. For Windows clients (press F11 or F12 or sometimes F9 or F10 for the boot menu; if that does not work press F2 or DEL for the BIOS menu and change the boot order), one has to make sure that "fast boot" (or "fast startup") is disabled (or Shift is pressed while shutting Windows down), and sometimespowercfg -H off(as Administrator in a console window) is additionally required; otherwise the USB stick may not boot. Occasionally we find a computer that does not boot from the stick because the BIOS screen can not be reached (due to unknown BIOS password; happens with machines belonging to institutions which administer them centrally) or some such, but 19 out of 20 work as they should. - we just install CCP4 and whatever else we need (XDS, Phenix, Chimera, ..), and then dd or ddrescue (on a machine with USB3 ports) an image of that stick to all other sticks.
- any number of bells and whistles could be added to this, like clients sending their hostnames to a server after booting, and accepting updates by rsync.
To make students familiar with the sticks and how to boot them, one needs 30+ minutes and a few tutors.
Some more details
- we always create a few-GB FAT32 partition because that makes file exchange with Windows and Macs very simple. The FAT32 partition should be the first partition on the stick; 2GB is enough for us. Then comes the Linux partition, with 13.9GB, so that the sum of the two partitions is slightly below 16GB. The third partition is then a 16.1GB /data partition. This scheme has the advantage that the image of the stick can just as well be copied (with dd or better ddrescue) to a 16GB stick; the /data partition then does not fit and cannot be used on that stick, but the operating system will then work on the small stick just as well. This requires that the /data partition is not fsck'ed automatically from /etc/fstab (0 in the 6th field). Also this means that the image of the stick need only comprise the first 16GB if the /data partition is empty - that makes it faster to copy it, and it is quite fast to re-create an empty /data partition after booting the stick.
- it is a good idea to give easy root access to the one user you create because certainly some packages will have to be installed or updated when the stick is in use
- it is a good idea to save an image of the stick whenever you made a successful change; otherwise you might need to start from scratch if you mess something up.
- (if the installation not already does it for you) you should label the partitions and use the labels for mounting the partitions in /etc/fstab; don't use /dev/sda1 or the like because depending on the hardware it is booted on, after booting the stick, and depending on the actual hardware, the stick may be /dev/sdb or /dev/sdc or ... !
How to create a bootabled GPT-partitioned USB-stick with Fedora 23
This will create a USB stick capable to
- EFI boot on Macs
- UEFI boot on PCs
- BIOS boot on newer hardware (legacy boot / CSM enabled in BIOS)
- BIOS boot on medium aged hardware
- not boot on really old BIOS hardware which doesn't support booting from GPT (see below)
GPT partition the stick using gdisk
The example shows a 32 GB Sandisk Extreme:
Part 1: +1G VFAT (0700) (Windows needs it to be the first partition) Part 2: +1M Biosboot (ef02) Part 3: +250M EFI (ef00) Part 4: +13500M / (0083) Part 5: +15000M /mnt/data (0083)
For performance, make sure that the big partitions are aligned to 8192-sector boundaries; gdisk default is 2048-sector boundaries - the default can be adjusted. If you use the above sizes and the + sign for specifying them, this happens to work out automatically.
Install Fedora23 on an UEFI machine (UEFI enabled; LegacyBoot / CSM disabled)
Whenever you see a ?, you must fill in the appropriate drive letter (e.g. c or d).
sd?3: efi /boot/efi sd?4: ext4 / sd?5: ext4 /mnt/data
adjust the USB-stick for UEFI/EFI boot (before reboot from chroot environment)
chroot:
chroot /mnt/sysimage
install updates:
dnf -y update # dnf on FC23 is successor to yum
configure grub2 for (U)EFI systems: disable auto recognition of other installed Operating systems (specific to current computer), and update grub2-efi.cfg to use uuid's (devices not consistent across different machines)
echo 'GRUB_DISABLE_OS_PROBER=”true”' >> /etc/default/grub grub2-mkconfig -o /etc/grub2-efi.cfg
(switches from devices to uuid and removes boot entries for other OS's)
Performance tuning (not strictly required): We use ext4 filesystems and data=writeback,nobarrier in /etc/fstab. To be able to set these options also on the / filesystem, we use tune2fs on a Linux machine where the stick (dev/sd?) is just plugged in (i.e. not booted from):
tune2fs -o journal_data_writeback,nobarrier /dev/sd?4 tune2fs -o journal_data_writeback,nobarrier /dev/sd?5
create & label vfat filesystem:
mkfs.vfat /dev/sd?1 dosfslabel /dev/sd?1 VFAT exit systemctl poweroff (or reboot for testing)
Install grub2 for BIOS boot (from chroot environment)
boot Fedora Live DVD on a BIOS machine and chroot to the stick:
mount /dev/sd?4 /mnt mount -o bind /dev /mnt/dev mount -t proc /proc /mnt/proc mount -t sysfs /sys /mnt/sys chroot /mnt
Install grub2 for BIOS boot and configure it:
rm /boot/grub2/grubenv
(symlink to /boot/efi/EFI/fedora/grubenv in grub2-efi.rpm; binary file in grub2.rpm)
grub2-install /dev/sd?
(also creates a new /boot/grub2/grubenv
grub2-mkconfig -o /etc/grub2.cfg
check /etc/grub2.cfg and if needed, change at all positions “linuxefi” to “linux16”, and “intrdefi” to “intrd16”
Problems on old BIOS hardware
some old computers still might not boot (they don't support booting from GPT). This can be fixed but the stick afterwards cannot boot on EFI/UEFI systems anymore. a) set the boot flag (active) on the single 0xEE partition in the protective MBR by using fdisk version <= 2.22 (versions 1.23 and newer have GPT support and thus don't make changes to the protective MBR but to the GPT) (I used fdisk (util-linux-ng 2.17.2) on a ScientificLinux 6.7 machine)
fdisk /dev/sd? a part 1 w
b) recompute CHS values using option “h” in gdisk's expert menu:
gdisk /dev/sd? x h m q
this can be reversed: - toggle bootflag off in old fdisk - recompute CHS values in gdisk
(using a sgdisk backup of the GPT should also be fine)
helpful links:
http://www.rodsbooks.com/gdisk/bios.html#bios --> option h of gdisks experts menu did the trick!
https://fedoraproject.org/wiki/GRUB_2?rd=Grub2#Updating_GRUB_2_configuration_on_BIOS_systems
generating images and copies of the stick
Fill empty part of all partitions on the stick with “zeros”: for each partition, do
dd if=/dev/zero of=/mountpoint/delete.me bs=65536 # this will stop when filesystem full rm /mountpoint/delete.me
This also seems to result in faster writes afterwards i.e. it is a way to restore the write speed of a USB stick.
Save a compressed disk image - we use the parallel gzip program called pigz:
dd if=/dev/sd? | pigz -c usbstick.img.gz
(time: ~180 secs speed: ~175MB/s, size of image: 1.8 GB) write compressed image back to a stick:
unpigz -c usbstick.img.gz | dd of=/dev/sd? bs=4096
(speed should be >100MB/s)