Beamline notes
This article is meant to collect information about specific beamlines.
GlobalPhasing's notes are at http://www.globalphasing.com/autoproc/wiki/index.cgi?BeamlineSettings .
- Taiwanese synchrotron (ADSC Q315R, SN 930), 2015 : ROTATION_AXIS=1 0 0 whereas in 2010 it was -1 0 0
- BM14 (ESRF; Mar CCD, as of April 2014) has X and Y reversed in the header. Generate_XDS.INP does not currently implement this reversal; it has to be done manually.
- Diamond ID24 recently moved from horizontal to vertical spindle for cryo data collection. If the CBF header has # Chi 0.0000 deg. and # Chi_increment 0.0000 deg. and # Oscillation_axis X.CW +SLOW then one needs ROTATION_AXIS=0 -1 0 . Maybe enough to check for "Detector: PILATUS3 6M, S/N 60-0119"
- PETRA P14 also needs ROTATION_AXIS=0 -1 0
- ALS 8.2.2 recent (Nov 2015) evidence indicates that the same beam center convention is used as for ESRF, PF, APS Argonne BLs.
- APS 19-ID with ADSC detector S/N=458 ( https://zenodo.org/record/45756 ) needs ROTATION_AXIS= -1 0 0 . FIXME: This should be put into the REVERSEPHI_SNs= section of generate_XDS.INP