Materialien
Zur Navigation springen
Zur Suche springen
Materialen für den Trotec Speedy 360 (CO2-Laser)
| Material | Gravieren | Schneiden | Markieren |
|---|---|---|---|
| Holz | Ja | Ja | Ja |
| Glas | Ja | ||
| Papier weiß | Ja | Ja | Ja |
| Papier farbig | Ja | Ja | Ja |
| Karton | Ja | Ja | Ja |
| Leder | Ja | Ja | Ja |
| Textilien | Ja | Ja | Ja |
| Spiegel | Ja | ||
| Stein | Ja | ||
| Keramik | Ja | Ja | |
| Kork | Ja | Ja | Ja |
| Lebensmittel | Ja | Ja | Ja |
| Metalle | |||
| Aluminium* | |||
| Aluminium eloxiert* | Ja | ||
| Edelstahl* | |||
| Beschichtetes Metall (lackiert) | Ja | ||
| Kunststoffe | |||
| Acrylnitril-Butadien-Styrol- Copolymer (ABS) | Ja | Ja | |
| Acryl (PMMA) | Ja | Ja | |
| Gummi (Stempelgummi) | Ja | Ja | |
| Polyamid (PA) | Ja | Ja | |
| Polybutylenterephthalat (PBT) | Ja | Ja | |
| Polycarbonat (PC) | Ja | Ja | |
| Polyethylen (PE) | Ja | Ja | |
| Polyester (PES) | Ja | Ja | |
| Polyethylenterephthalat (PET) | Ja | Ja | |
| Polyimid (PI) | Ja | Ja | |
| Polyoxymethylen (POM), z.B. Delrin® | Ja | Ja | |
| Polypropylen (PP) | Ja | Ja | |
| Polyhenylensulfid (PPS) | Ja | Ja | |
| Polystyrol (PS) | Ja | Ja | |
| Polyurethan (PUR) Schaum | Ja | Ja | |
| Schaumstoff (PVC frei) | Ja | Ja | |
* Die obigen Metalle können auch mit einem CO2-Laser bearbeitet. Dies erfordert einen zusätzlichen Bearbeitungsschritt und die Verwendung von Verbrauchsmaterialen, z.B. Lasermarkierungspaste.
Eine kurze Materialübersicht mit Hinweisen zur Verwendung findet sich auch unter: https://www.fabcreator.com/de/materials#
Internet-Shops für Lasermaterial
Eine ausführliche Linkliste mit Shops für Lasermaterialien findet sich unter: https://kreativeseite.com/2022/01/01/shops-lasermaterial/