Generate XDS.INP
This script generates XDS.INP based on a list of frame names supplied on the commandline. It currently works for MarCCD, ADSC, Pilatus, Eiger, some Rigaku and one Bruker detector(s); since this is just a bash script, extension to other detectors should be very easy.
Usage
Usage is just (don't forget the quotation marks!):
generate_XDS.INP "/home/myname/frms/mydata_1_???.img"
XDS supports bzip2-ed frames. Thus, when specifying the frame name parameter of the script, you should leave out any .bz2 extension.
For improved interaction with XDSGUI, it is advantageous to provide an absolute filename for the data files - one that starts with a slash ("/").
The script
#!/bin/bash
# purpose: generate XDS.INP
#
# tested with some datasets from ALS, SSRL, SLS, ESRF, BESSY, SPring-8 and PF; only MAR, ADSC/SMV, PILATUS, Eiger, RAXIS (in-house), Bruker (PHOTON II) detectors;
# for other detectors, values marked with XXX must be manually filled in.
#
# revision 0.03 . Kay Diederichs 2/2010
# revision 0.04 . Kay Diederichs 4/2010 - include alternative ORGX, ORGY calculations for ADSC
# revision 0.05 . Kay Diederichs 5/2010 - grep for "Corrected" in addition to "marccd"; needed for BESSY
# revision 0.06 . KD 6/2010 - add UNTRUSTED_RECTANGLE and UNTRUSTED_ELLIPSE; use `whereis catmar` and so on
# revision 0.07 . KD 6/2010 - decide about ORGX/Y info in MAR header being pixels or mm; other fixes
# revision 0.08 . KD 6/2010 - fixes for Pilatus 6M
# revision 0.09 . KD 6/2010 - get rid of requirement for mccd_xdsparams.pl and/or catmar; rather use "od"
# revision 0.10 . Tim Gruene 7/2010 - set link 'images' to image directory if path exceeds 72 characters
# revision 0.11 . KD 7/2010 - for MarCCD: look for distance info at different byte position
# revision 0.12 . KD 7/2010 - fix for negative PHISTART
# revision 0.13 . KD 8/2010 - store correct NX NY QX QY in XDS.INP
# revision 0.14 . KD 1/2011 - SENSOR_THICKNESS for Pilatus; MINIMUM_NUMBER_OF_PIXELS_IN_A_SPOT=3
# revision 0.15 . KD 2/2011 - add comment for -ive sign of APS 19-ID and Australian Synchrotron rotation axis
# revision 0.16 . KD 3/2011 - SENSOR_THICKNESS=0.01 for ADSC and MarCCD. Add comment about SILICON=
# revision 0.17 . KD 3/2011 - make it work for .bz2 frames; improve screen output
# revision 0.18 . KD 4/2011 - faster by doing "strings" only once; revert "images/${1##/*/}" "correction"
# revision 0.19 . KD 6/2011 - bugfix for 0.18
# revision 0.20 . KD 7/2011 - redirect stderr of /bin/ls to /dev/null
# revision 0.21 . KD 11/2011 - SEPMIN, CLUSTER_RADIUS hints; read NX NY from header (for Pilatus 2M)
# revision 0.22 . KD 12/2011 - Pilatus 2M UNTRUSTED_RECTANGLE lines, SENSOR_THICKNESS from header
# revision 0.23 . KD 1/2012 - add UNTRUSTED_QUADRILATERAL, remove MINIMUM_ZETA (0.05 is default now)
# revision 0.24 . KD 3/2012 - remove revision 0.10 since XDS now takes much longer paths
# revision 0.25 . KD 3/2012 - remove revision 0.22 for PSI Pilatus 2M; see http://www.globalphasing.com/autoproc/wiki/index.cgi?TroubleShootingKnownIssues
# revision 0.26 . KD 7/2012 - Mac-compatibility: replace od flags --skip-bytes= and --read-bytes= with -j and -N (thanks to Oliver Clarke for working this out!)
# revision 0.27 . KD 11/2012 - EXCLUDE_RESOLUTION_RANGE lines and generic Pilatus Flat_field test
# revision 0.28 . Keitaro 11/2012 - for MarCCD: read oscillation range from the position 1024+736 (fix for omega rotation)
# revision 0.29 . KD 1/2013 - include UNTRUSTED_RECTANGLEs for Pilatus 6M; never hurts but needed if the beamline software does not mark them with -2 or such
# revision 0.30 . Keitaro 3/2013 - for ADSC: write all possible beam center conventions in XDS.INP as comments
# revision 0.31 . Keitaro 3/2013 - add comment for reversed phi for SPring-8
# revision 0.32 . Keitaro 3/2013 - add RAXIS support. only tested with RAXIS IV++ and VII.
# revision 0.33 . Keitaro 5/2013 - automatically set ROTATION_AXIS=-1 0 0 for SPring-8 BL32XU/41XU/44XU beamlines based on detector serial numbers.
# revision 0.34 . Keitaro 5/2013 - recognize ADSC detectors in Photon Factory and choose correct beam center convention based on detector serial numbers.
# revision 0.35 . KD 6/2013 - reduce 7000 to 6000 for shadow detection; insert comment about *_RESOLUTION_RANGE lines
# revision 0.36 . KD 6/2013 - insert NUMBER_OF_PROFILE_GRID* lines for Pilatus (suggested by C.Vonrhein)
# revision 0.37 . Keitaro 10/2013 - fix for MX225HS detector on SPring-8 BL32XU (Ignore case when matching marccd in header); see also rev-0.39
# revision 0.38 . KD 2/2014 - change defaults for REFINE(IDXREF) and REFINE(INTEGRATE) such that more stable results are obtained for difficult datasets
# revision 0.39 . Keitaro 4/2014 - automatically set ROTATION_AXIS=-1 0 0 for MX225HS at SPring-8 BL32XU.
# revision 0.40 . Jan Gebauer /KD 4/2014 - simple implementation of MAR345 detector
# revision 0.41 . recognize header starting with R-AXIS instead of RAXIS
# revision 0.42 . Keitaro 5/2014 automatically set ROTATION_AXIS=-1 0 0 for Q315 at SPring-8 BL38B1.
# revision 0.43 . Keitaro 5/2014 add experimental support of dTREK format (raxis_smv)
# revision 0.44 . Keitaro 5/2014 automatically set ROTATION_AXIS=-1 0 0 for PILATUS3 at SPring-8 BL41XU.
# revision 0.45 . KD cope with blanks in filenames
# revision 0.46 . Keitaro 6/2014 automatically set ROTATION_AXIS=-1 0 0 for Mar225 at SPring-8 BL26B2.
# revision 0.47 . Keitaro 7/2014 more generic dTREK format support (Saturn and RAXIS)
# revision 0.48 . Kip Guja 11/2014 add detector serial number for ALS 5.0.2 to beam center convention 1
# revision 0.49 . Nobuhisa 2/2015 add detector serial number for AichiSR BL2S1 to beam center convention 1
# revision 0.50 . KD 03/2015 workaround for Mar-1 change of parameter name "DISTANCE" to "POSITION" in REFINE(*) keywords
# revision 0.51 . Keitaro 03/2015 add .gz and .xz support and remove limitation - frame numbers can start with any.
# revision 0.52 . Keitaro 05/2015 fix ADSC beam center convention for SPring-8 and DET_SN acquisition for PILATUS (didn't work on Mac)
# revision 0.53 . KD add ADSC beam center convention for APS Argonne but only as commented line in XDS.INP (not detector serial no)
# revision 0.54 . KD add ADSC S/N 911 for APS Argonne, and fix spurious output arising from THETADISTANCE (?!)
# revision 0.55 . KD add ADSC S/N 446 for APS, and check w/ 12 datasets from data.sbgrid.org. No rule found: S/N 916 @ APS 24_ID_E !
# revision 0.56 . Keitaro 12/2015 show error message when user's input didn't match any files
# revision 0.57 . KD 12/2015 start to take care of vertical ROTATION_AXIS at Diamond I24 - for now only introduce comment
# revision 0.58 . Keitaro 01/2016 fix for dTREK image: take 'rotation axis' information from header
# revision 0.59 . KD 04/04/2016 check for ADSC detector _after_ dtrek detector, to correct wrong choice for https://zenodo.org/record/45756
# revision 0.60 . KD 04/04/2016 ADSC detector SN=458 at APS 19-ID has reverse phi (https://zenodo.org/record/45756)
# revision 0.61 . Keitaro 10/04/2016 Add Eiger hdf5 support (may be incomplete; UNTRUSTED_RECTANGLE=s not set) NEED h5dump.
# revision 0.62 . Keitaro 11/04/2016 Can give foo_master.h5 instead of foo_??????.h5.
# revision 0.63 . Keitaro 13/04/2016 Set UNTRUSTED_RECTANGLE=s for EIGER 9M and 16M (KD).
# revision 0.64 . KD 16/06/2016 reverse phi @APS 19ID (reported by Wolfram Tempel)
# revision 0.65 . Keitaro 07/09/2016 Fix for "too many arguments" problem in ls
# revision 0.66 . KD 15/09/2016 add Bruker PHOTON II with .cbf frames
# revision 0.67 . KD 02/10/2016 add BM30A (ADSC SERIAL 924) reverse_phi
# revision 0.68 . KD 24/10/2016 add -H option (follow symlinks) to "find" command (thanks to Jan Gebauer!)
# revision 0.69 . KD 04/11/2016 add CMOS-1 MBC Detector at ALS 4.2.2
# revision 0.70beta . KD 08/12/2016 ROTATION_AXIS=0 -1 0 at Diamond I24; depending on CBF header
# revision 0.70 . KD 12/01/2017 remove error message if h5dump does not find /entry/sample/transformations/omega/vector
# revision 0.71 . KD 27/02/2017 implement rule for S/N 916 @ APS 24_ID_E
# revision 0.72 . KD 8/03/2017 fix nframes lookup in Eiger master file
# revision 0.73 . KD 18/05/2017 for Andrey Nascimento: add Pilatus 2M S/N 24-0109 with ROTATION_AXIS=-1 0 0
# revision 0.74 . Keitaro 02/08/2017 Add PILATUS3 6M, S/N 60-0127 at CHESS F1 with ROTATION_AXIS=-1 0 0
# revision 0.75 . KD 30/08/2017 reversed ORGX and ORGY for marCCD @ BM14 (Indian beamline @ ESRF)
# revision 0.76 . KD 4/09/2017 include POSITION into REFINE(IDXREF) because latest XDS is more robust. Add comments to keywords.
# revision 0.77 . KD 19/12/2017 obtain QX QY from CBF header.
# revision 0.78 . KD 21/12/2017 if possible and sensible, provide LIB= line with hardcoded /usr/local/lib64/dectris-neggia.so .
# revision 0.79 . KD 16/01/2018 read OVERLOAD from Pilatus miniCBF header instead of fixing at 1048576
# revision 0.80 . KD 13/02/2018 remove DISTANCE keyword from REFINE() list; remove POSITION from REFINE(IDXREF)
# revision 0.81 . KD 21/02/2018 when encountering CBF files from Eiger (ESRF), treat as Pilatus detector
# revision 0.82 . KD 01/03/2018 STARTING_ANGLE for MarCCD/Pilatus/PHOTON, enabling to use dials.rs_mapper with spot2pdb.
# revision 0.83 . KD 25/06/2018 for ADSC detector #458 at APS BM19, revert the definition of ROTATION_AXIS=-1 0 0. See "Beamline notes" in this wiki.
# revision 0.84 . KD 10/10/2018 implement Pilatus detector with d*TREK header
# revision 0.85 . Jie Nan 09/01/2019 STARTING_ANGLE for Eiger
# revision 0.86 . Keitaro 03/05/2019 Add PILATUS3 6M, S/N 60-0123 at SSRF BL18U-1 with ROTATION_AXIS=-1 0 0
# revision 0.87 . KD 12/10/2019 Add PILATUS XXX, S/N XX-XXX at SSRF BL19U1 and MarCCD detector #43 at BL17B1 with ROTATION_AXIS=-1 0 0
# revision 0.88 . KD 16/10/2019 fixes for SSRF, add "-maxdepth 1" to "find -H ..."
# revision 0.89 . KD 21/10/2019 add ADSC S/N 905 at ALS 8.2.1, S/N 928 at Australian Synchrotron MX2 beamline; final SSRF fixes
# revision 0.90 . KD 25/10/2019 add OLDMAR detector type. Tested w/ SBGrid data set 6. Anomalous signal may have wrong hand!
# revision 0.91 . KD 16/01/2020 Allow negative starting angle for Eiger (found -33 at SLS !).
# revision 0.92 . KD 27/02/2020 read *_master.h5 from Diamond Light Source
# revision 0.93 . KD 13/03/2020 print out 2theta for MarCCD (DETECTOR_*_AXIS can be derived from this)
# revision 0.94 . KD 16/03/2020 bugfix for Bruker-cbf to make bc accept e.g. 3.1e-005 by using awk printf "%.5f" instead of awk print
# revision 0.95 . KD 29/07/2020 fix DLS Eiger HDF5 variant OSCILLATION_RANGE, STARTING_ANGLE. Attention: DLS Eiger variant needs h5dump 1.10 for OVERLOAD!
# revision 0.96 . KD 03/10/2020 make script echo detector serial number if inverted ROTATION_AXIS is detected.
# revision 0.97 . KD 19/10/2020 add UNTRUSTED_RECTANGLEs for Eiger2 (which has a few pixels less than Eiger (thanks to Andreas Förster)
# revision 0.98 . Thomas Hauß (HZB) 06/11/2020 switch Python print syntax to Python3
# revision 0.99 . Aaron Finke (CHESS) 07/11/2020 add ROTATION_AXIS=-1 0 0 for EIGER2 16M detector at MX beamline ID7B2 (CHESS)
# revision 1.00 . Gleb Bourenkov 10/11/2020 add ROTATION_AXIS=0 -1 0 for beamline P14 (EMBL Hamburg) detectors Eiger 16M S/N E-32-0107; previously Eiger 4M S/N E-08-0107 and PILATUS 6M-F, S/N 60-0115-F
# revision 1.01 . KD 07/12/2020 ROTATION_AXIS=0 -1 0 for Pilatus3 2M, S/N 24-0118 at ID23-2 (http://www.globalphasing.com/autoproc/wiki/index.cgi?BeamlineSettings)
# revision 1.02 . KD 11/01/2021 recognize mar555 detector as mar345 (thanks to Thomas Hauß, HZB)
# revision 1.03 . Feng Yu 18/7/2021 fix/expand information about Shanghai Synchrotron Radiation Facility (SSRF)
# revision 1.04 . Zhipu Luo 13/08/2021 extract ORGX,ORGY for electron diffraction from SMV header if the wavelength value starts with 0.0
# revision 1.05 . KD specialcase extraction of number of images for BNL detectors E-32-0101 and E-18-0104
# revision 1.06 . KD fix URLs in output. Availability of Apple M1 processor dectris-neggia-Apple-arm64.so . LC_ALL=C .
# revision 1.07 . KD, Thomas Hauß, Gleb Bourenkov 25/10/2021. Detector moved from Petra P14 to P13
# revision 1.08 . KD, Thomas Hauß, Feng Yu 7/11/2021 fix TZ in timestamps for SSRF detectors
# revision 1.09 . KD, Feng Yu 7/11/2021 fix detector number BNL E-18-0121 to be E-18-0104
# revision 1.10 . KD NeXus header for Eiger
# revision 1.11 . KD / Helena Taberman ROTATION_AXIS=-1 0 0 for Eiger .cbf data from Petra P14
# revision 1.12 . KD / Helena Taberman correct rev 1.11 to be 0 -1 0
# revision 1.13 . KD variables for /usr/local/lib64/dectris-neggia.so and durin-plugin.so . Remove h5dump error messages.
# revision 1.14 . Juno Krahn 16/03/2023 Modified initial string header extraction; added exit to awk token extractions
# Print help if multiple arguments (e.g. forgot quotes) or if neither '???' or master.h5
# Set full path for frames; needed by some tools (e.g. show frame with predicted spots)
# Comment out FRACTION_OF_POLARIZATION if wavelength is copper K-alpha
# 2-theta offset, rotation axis, starting angle, and flipping updated for all dtrek detectors
# Untrusted rectangle for Saturn944
# Environment variables to define alternate paths for dectris-neggia.so and durin-plugin.so
# Append detector specific parameters from $HOME/.xds-site/${DET}_${DET_SN}
# Cleaned up section for creating XDS.INP
REVISION="1.14 (12-Apr-2023)"
#
# usage: e.g. generate_XDS.INP "/file/system/frms/mydata_1_???.img"
# make sure to have the two quotation marks !
# the ? are wildcards for the frame numbers.
#
# known problems:
# - for ADSC detectors, there are at least three ways to obtain ORGX and ORGY values from the header (see below);
# - the same might be a problem for MAR headers, too (not sure about this)
# - on macOS, the "Command Line Tools for Xcode" (from https://developer.apple.com/download/more/) are needed.
#
# notes for debugging of the script:
# - add the -x option to #!/bin/bash in first line, to see where an error occurs
# - comment out the removal of tmp1 and tmp2 in the last line
#
# ====== Start of script ======
echo generate_XDS.INP version $REVISION . Obtain the latest version from
echo http://strucbio.biologie.uni-konstanz.de/xdswiki/index.php/generate_XDS.INP
if [ "$1" == "help" ] || [ "$1" == "-help" ] || [ "$1" == "-h" ] || [ "$1" == "" ] || [ "$2" != "" ] || ! [[ "$1" =~ \?\?|_master\.h5 ]]; then
echo usage: generate_XDS.INP \"/file/system/frms/mydata_1_???.img\" \(_with_ the quotation marks!\)
echo If the frames are compressed leave out the extension .bz2, .gz, or .xz!
echo for .h5 files: generate_XDS.INP /file/system/frms/mydata_1_master.h5
exit
fi
# make sure the locale does not interfere with e.g. awk calculations:
export LC_ALL="C"
#
# defaults:
#
# conversion radian / degrees:
DEGTOR=57.2957795
DETECTOR="XXX MINIMUM_VALID_PIXEL_VALUE=XXX OVERLOAD=XXX"
REVERSE_PHI="no"
ORGX=XXX
ORGY=XXX
DETECTOR_DISTANCE=XXX
OSCILLATION_RANGE=XXX
X_RAY_WAVELENGTH=XXX
QX=XXX
QY=XXX
NX=XXX
NY=XXX
SENSOR_THICKNESS=0
TRUSTED_REGION="0.0 1.2 ! partially use corners of detector (0 1.4143: use all pixels)"
# default MINIMUM_NUMBER_OF_PIXELS_IN_A_SPOT
MNOPIAS=3
# default DIRECTION_OF_DETECTOR_X-AXIS
DIRECTION_OF_DETECTOR_X_AXIS="1 0 0"
# default DIRECTION_OF_DETECTOR_Y-AXIS
DIRECTION_OF_DETECTOR_Y_AXIS="0 1 0"
# default FRACTION_OF_POLARIZATION
pol_frac=0.98
# default POLARIZATION_PLANE_NORMAL
POLARIZATION_PLANE_NORMAL="0 1 0"
STARTING_ANGLE=0
dtrek_det=""
SEPMIN=7.0
CLUSTER_RADIUS=3.5
REFINE_CORRECT="CELL BEAM ORIENTATION AXIS POSITION ! Default is: refine everything"
dname=$(dirname "$1")
# Convert to full path (verify 'realpath' is available first)
command -v realpath &> /dev/null && dname=$(realpath $dname)
test "${dname}" == "" && dname="."
bname=$(basename "$1")
# see how we are called:
NAME_TEMPLATE_OF_DATA_FRAMES="${dname}/${bname}"
# list frames matching the wildcards in NAME_TEMPLATE_OF_DATA_FRAMES
# don't accept the "direct beam" shot at SLS/Pilatus PX-I and PX-II
# cope with blanks in directory / file name
IFS=$'\n'
find -H $dname -maxdepth 1 -name "$bname" -or -name "${bname}.bz2" -or -name "${bname}.gz" -or -name "${bname}.xz" | egrep -v "_00000.cbf|_000.img" | sort > tmp1
if [ ! -s tmp1 ]
then
echo "Error! No files matched: $1"
rm -f tmp1
exit 1
fi
unset IFS
# we can continue - the frames are found
if echo $NAME_TEMPLATE_OF_DATA_FRAMES | grep '_master.h5$' > /dev/null; then
NAME_TEMPLATE_OF_DATA_FRAMES=`echo "$NAME_TEMPLATE_OF_DATA_FRAMES" | sed -e 's/_master.h5$/_??????.h5/'`
else
# Find the first '?' position and the number of '?' to determine DATA_RANGE=.
pos1=`echo "$NAME_TEMPLATE_OF_DATA_FRAMES" | awk '{print index($0, "?")}'`
pos2=`echo "$NAME_TEMPLATE_OF_DATA_FRAMES" | sed -e "s/[^\?]//g" | awk '{print length+'$pos1' - 1}'`
data_first=`cut -b $pos1-$pos2 tmp1 | head -n1 | bc`
data_last=`cut -b $pos1-$pos2 tmp1 | tail -n1 | bc`
DATA_RANGE="$data_first $data_last"
echo DATA_RANGE=$DATA_RANGE
# set SPOT_RANGE to first half of DATA_RANGE
data_num=`wc -l tmp1 | awk '{print $1}'`
data_half=`echo "scale=0; $data_num/2" | bc -l`
data_half=`echo "if ($data_half<=1) 1;if ($data_half>1) $data_half" | bc -l`
spot_last=`echo "scale=0; $data_first+$data_half-1" | bc -l`
SPOT_RANGE="$data_first $spot_last"
fi
FIRSTFRAME=`head -1 tmp1`
echo $FIRSTFRAME | grep "\.h5$" && is_h5=1 || is_h5=0
# find out detector type
DET=XXX
IFS=$'\n'
echo $FIRSTFRAME | grep -q '\.bz2$' && bzcat $FIRSTFRAME > tmp1 && FIRSTFRAME=tmp1
# for mac/linux compatibility. zcat foo.gz doesn't work on mac.
echo $FIRSTFRAME | grep -q '\.gz$' && zcat < $FIRSTFRAME > tmp1 && FIRSTFRAME=tmp1
echo $FIRSTFRAME | grep -q '\.xz$' && xzcat $FIRSTFRAME > tmp1 && FIRSTFRAME=tmp1
unset IFS
if [ "$is_h5" == 0 ]; then
# extract strings from binary file header, removing leading '#' (Pilatus) and trailing ';' (CBF)
strings $FIRSTFRAME | head -400 | sed 's/^ *#\|; *$//;' >tmp2
# TODO: whenever FIRSTFRAME is used below, it should be copied to tmp2 (using IFS as above), and tmp2 should be used instead
# this was done for "mccd", but still has to be done for the "raxis" detector types
# the reason is that FIRSTFRAME may contain a blank, which makes some commands fail
egrep -qi 'marccd|Corrected' tmp2 && DET=mccd
grep -q PILATUS tmp2 && DET=pilatus
grep -iq Eiger tmp2 && DET=pilatus
head -n1 tmp2 | grep -q "^RAXIS" && DET=raxis
head -n1 tmp2 | grep -q "^R-AXIS" && DET=raxis
grep -q "^SOURCE_WAVELENGTH= *1" tmp2 && DET=dtrek
grep -q BEAM_CENTER_X tmp2 && DET=adsc
grep -q mar345 tmp2 && DET=MAR345
# rev. 1.02: in one case, mar555 data could be processed pretending it is mar345, so:
grep -q mar555 tmp2 && DET=MAR345
grep -q BRUKER tmp2 && grep -q CBF tmp2 && DET=Bruker-cbf
grep -q CMOS1 tmp2 && DET=adsc-CMOS1
grep -q MARCONTROL tmp2 && DET=OLDMAR
grep -q "WAVELENGTH=0.0" tmp2 && DET=experimental-ED
else
h5dump -d "/entry/instrument/detector/description" $FIRSTFRAME | grep -i Eiger > /dev/null && DET=eiger
fi
# identify other detector types in the same way
# parse ASCII header of first frame
if [ "$DET" == "XXX" ]; then
echo "Detector type unknown -- fill in XXX values manually!"
DETECTOR="XXX MINIMUM_VALID_PIXEL_VALUE=XXX OVERLOAD=XXX"
# find parameters of first frame
elif [ "$DET" == "mccd" ]; then
echo Data from a MarCCD detector
# http://www.sb.fsu.edu/~xray/Manuals/marCCD165header.html has header information
DETECTOR="CCDCHESS MINIMUM_VALID_PIXEL_VALUE= 1 OVERLOAD= 65500"
SENSOR_THICKNESS=0.01
# use first frame of dataset to obtain parameters
# Check detector serial number and recognize beamline for reversed-phi setting.
# Known detectors for reversed-phi in SPring-8: 24: BL26B2 Mar225, 31: BL32XU MX225HE, 38: BL44XU MX225HE, 42: BL44XU MX300HE, 40: BL41XU MX225HE, 106: BL32XU MX225HS
# same for SSRF: BL17B1 rayonix MX300. As on 2019-10-13, this also needs doubling of ORGX and ORGY. But the beamline staff (Wenming) wants to fix the header.
REVERSEPHI_SNs="
24
31
38
40
42
43
106
"
# get detector serial number and check if it is included in the list
DET_SN=`grep "Detector Serial Number =" tmp2 | sed "s/Detector Serial Number = //"`
if echo "${DET_SN}${REVERSEPHI_SNs}" | sort | uniq -d | grep [0-9] > /dev/null; then
REVERSE_PHI="yes"
echo inverted ROTATION_AXIS since Detector Serial Number is "${DET_SN}"
fi
# offsets are documented; values can be found in mccd_xdsparams.pl script
IFS=$'\n'
cp $FIRSTFRAME tmp2
unset IFS
let SKIP=1024+80
NX=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
let SKIP=$SKIP+4
NY=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
let SKIP=1720
DETECTOR_DISTANCE=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
DETECTOR_DISTANCE=`echo "scale=3; $DETECTOR_DISTANCE/1000" | bc -l`
# Mar 12, 2020 KD
let SKIP=1724
TWOTHETA=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
TWOTHETA=`echo "scale=3; $TWOTHETA/1000" | bc -l`
echo 2THETA= $TWOTHETA
let SKIP=1024+256+128+256+44
STARTING_ANGLE=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
STARTING_ANGLE=`echo "scale=2; $STARTING_ANGLE/1000" | bc -l `
let SKIP=1024+256+128+256+4
ORGX=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
ORGX=`echo "scale=2; $ORGX/1000" | bc -l `
let SKIP=$SKIP+4
ORGY=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
ORGY=`echo "scale=2; $ORGY/1000" | bc -l `
# fixed Aug 30, 2017 after IUCr2017 @ Hyderabad
if [ "$DET_SN" == "4" ]; then
TEMP=$ORGY
ORGY=$ORGX
ORGX=$TEMP
echo reversed ORGX and ORGY for marCCD @ ESRF BM14
fi
let SKIP=1024+736
OSCILLATION_RANGE=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
OSCILLATION_RANGE=`echo "scale=3; $OSCILLATION_RANGE/1000" | bc -l`
let SKIP=1024+256+128+256+128+4
QX=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
QX=`echo "scale=10; $QX/1000000" |bc -l `
let SKIP=$SKIP+4
QY=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
QY=`echo "scale=10; $QY/1000000" |bc -l `
let SKIP=1024+256+128+256+128+128+12
X_RAY_WAVELENGTH=$(od -t dI -j $SKIP -N 4 tmp2 | head -1 | awk '{print $2}')
X_RAY_WAVELENGTH=`echo "scale=5; $X_RAY_WAVELENGTH/100000" | bc -l`
# at most BLs, ORGX and ORGY are in pixels, but sometimes in mm ... guess:
NXBYFOUR=`echo "scale=0; $NX/4" | bc -l `
ORGXINT=`echo "scale=0; $ORGX/1" | bc -l `
if [ $ORGXINT -lt $NXBYFOUR ]; then
ORGX=`echo "scale=1; $ORGX/$QX" | bc -l`
ORGY=`echo "scale=1; $ORGY/$QY" | bc -l`
echo MARCCD detector: header ORGX, ORGY seem to be in mm ... converting to pixels
else
echo MARCCD detector: header ORGX, ORGY seem to be in pixel units
fi
elif [ "$DET" == "adsc" ]; then
DETECTOR="ADSC MINIMUM_VALID_PIXEL_VALUE= 1 OVERLOAD= 65000"
echo Data from ADSC detector. Obtaining ORGX, ORGY depends on beamline setup:
SENSOR_THICKNESS=0.01
# find X_RAY_WAVELENGTH:
X_RAY_WAVELENGTH=`grep WAVELENGTH tmp2 | head -1 | sed s/WAVELENGTH=//`
# find NX, QX, ORGX and ORGY:
NX=`grep SIZE1 tmp2 | tail -1 | sed s/SIZE1=//`
NY=`grep SIZE2 tmp2 | tail -1 | sed s/SIZE2=//`
QX=`grep PIXEL_SIZE tmp2 | sed s/PIXEL_SIZE=//`
QY=$QX
BEAM_CENTER_X=`grep BEAM_CENTER_X tmp2 | sed s/BEAM_CENTER_X=//`
BEAM_CENTER_Y=`grep BEAM_CENTER_Y tmp2 | sed s/BEAM_CENTER_Y=//`
COMMENT_ORGXY="
! Following are possible beam center interpretations for ADSC detectors"
# at ESRF, PF, ALS 5.0.2, AS MX2 and ... (pls fill in!) the following should be used:
ORGX1=`echo "scale=1; $BEAM_CENTER_Y/$QX" | bc -l`
ORGY1=`echo "scale=1; $BEAM_CENTER_X/$QX" | bc -l`
echo - at ESRF, PF, ALS 8.2.1, APS Argonne BLs use: ORGX=$ORGX1 ORGY=$ORGY1
COMMENT_ORGXY="${COMMENT_ORGXY}
! ORGX= $ORGX1 ORGY= $ORGY1 ! For ESRF, PF, APS, AS MX2 ..."
# this 2nd alternative convention should be used at the following beamlines (pls complete the list): ALS 5.0.3, ...
ORGX2=`echo "scale=1; $NX-$BEAM_CENTER_X/$QX" | bc -l `
ORGY2=`echo "scale=1; $BEAM_CENTER_Y/$QX" | bc -l `
echo - at e.g. ALS 5.0.3 use: ORGX=$ORGX2 ORGY=$ORGY2
COMMENT_ORGXY="${COMMENT_ORGXY}
! ORGX= $ORGX2 ORGY= $ORGY2 ! For ALS 5.0.3,.."
# this 3rd alternative convention should be used at the following beamlines (pls complete the list): ALS 8.2.2, ...
# this alternative is written into the generated XDS.INP ! You have to correct this manually in XDS.INP, or adjust this script.
ORGX3=`echo "scale=1; $BEAM_CENTER_X/$QX" | bc -l `
ORGY3=`echo "scale=1; $NX-$BEAM_CENTER_Y/$QX" | bc -l `
echo - at e.g. ALS 8.2.2 use: ORGX=$ORGX3 ORGY=$ORGY3 - this is written to XDS.INP if beamline is not detected
COMMENT_ORGXY="${COMMENT_ORGXY}
! ORGX= $ORGX3 ORGY= $ORGY3 ! For ALS 8.2.2,.."
# this 4th alternative convention should be used at the following beamlines (pls complete the list): SPring-8, ...
ORGX4=`echo "scale=1; $BEAM_CENTER_X/$QX" | bc -l `
ORGY4=`echo "scale=1; $BEAM_CENTER_Y/$QX" | bc -l `
echo - at e.g. SPring-8 use: ORGX=$ORGX4 ORGY=$ORGY4
COMMENT_ORGXY="${COMMENT_ORGXY}
! ORGX= $ORGX4 ORGY= $ORGY4 ! For SPring-8,.."
# Decision of beam center convention based on detector serial numbers.
DET_SN=`grep DETECTOR_SN tmp2 | sed -e "s/DETECTOR_SN=//"`
echo Detector serial number is $DET_SN
# For convention 1; Known PF detectors = 449: NW12A Q210, 472: NE3A Q270, 474: BL17A Q270, 912: BL5A Q315, 923: ALS BL5.0.2 Q315, 933: AichiSR BL2S1 Q315, 916: APS 24 IDE, 928: AS MX2
ORG1_SNs="
449
472
474
912
923
933
911
446
916
905
928
"
ORG4_SNs="
915
"
if echo "${DET_SN}${ORG1_SNs}" | sort | uniq -d | grep [0-9] > /dev/null; then
ORGX=$ORGX1
ORGY=$ORGY1
echo the following was chosen based on detector serial number:
elif echo "${DET_SN}${ORG4_SNs}" | sort | uniq -d | grep [0-9] > /dev/null; then
ORGX=$ORGX4
ORGY=$ORGY4
echo the following was chosen based on detector serial number:
else
ORGX=$ORGX3
ORGY=$ORGY3
echo the following default was chosen because the detector serial number was not special-cased:
fi
# Check detector serial number and recognize beamline for reversed-phi setting.
# Known detectors for reversed-phi in SPring-8: 915: BL38B1 Q315; APS 19-ID: 458; BM30A: 924
# 928 is at Australian Beamline MX2
# revision 0.83 of this script removes 458 from the list!
REVERSEPHI_SNs="
915
924
928
"
if echo "${DET_SN}${REVERSEPHI_SNs}" | sort | uniq -d | grep [0-9] > /dev/null; then
REVERSE_PHI="yes"
echo inverted ROTATION_AXIS since detector serial number is ${DET_SN}
fi
# find DETECTOR_DISTANCE and OSCILLATION_RANGE:
DETECTOR_DISTANCE=`grep ^DISTANCE tmp2 | sed s/DISTANCE=//`
OSCILLATION_RANGE=`grep OSC_RANGE tmp2 | sed s/OSC_RANGE=//`
elif [ "$DET" == "adsc-CMOS1" ]; then
DETECTOR="ADSC MINIMUM_VALID_PIXEL_VALUE= 1 OVERLOAD= 65000"
echo Data from CMOS1 MBC detector.
SENSOR_THICKNESS=0.01
X_RAY_WAVELENGTH=`grep WAVELENGTH tmp2 | head -1 | sed s/WAVELENGTH=//`
NX=`grep SIZE1 tmp2 | tail -1 | sed s/SIZE1=//`
QX=`grep PIXEL_SIZE tmp2 | sed s/PIXEL_SIZE=//`
NY=`grep SIZE2 tmp2 | tail -1 | sed s/SIZE2=//`
QY=$QX
ORGX=`grep BEAM_CENTER_X tmp2 | sed s/BEAM_CENTER_X=//`
ORGY=`grep BEAM_CENTER_Y tmp2 | sed s/BEAM_CENTER_Y=//`
REVERSE_PHI="yes"
DETECTOR_DISTANCE=`grep ^DISTANCE tmp2 | sed s/DISTANCE=/-/`
OSCILLATION_RANGE=`grep OMEGA_DELTA tmp2 | sed s/OMEGA_DELTA=//`
DETECTOR_X_AXIS="-1 0 0"
elif [ "$DET" == "experimental-ED" ]; then
DETECTOR="ADSC MINIMUM_VALID_PIXEL_VALUE= 1 OVERLOAD= 65000 ! OVERLOAD is really unknown "
echo --- Electron diffraction data in SMV format!
SENSOR_THICKNESS=0.01
X_RAY_WAVELENGTH=`grep WAVELENGTH tmp2 | head -1 | sed s/WAVELENGTH=//`
NX=`grep SIZE1 tmp2 | tail -1 | sed s/SIZE1=//`
QX=`grep PIXEL_SIZE tmp2 | sed s/PIXEL_SIZE=//`
NY=`grep SIZE2 tmp2 | tail -1 | sed s/SIZE2=//`
QY=$QX
BEAM_CENTER_X=`grep BEAM_CENTER_X tmp2 | sed s/BEAM_CENTER_X=//`
BEAM_CENTER_Y=`grep BEAM_CENTER_Y tmp2 | sed s/BEAM_CENTER_Y=//`
QXY=`echo "scale=1; $QX*($BEAM_CENTER_X+$BEAM_CENTER_Y)" | bc -l`
if [ "$QXY" "<" "$BEAM_CENTER_X" ] ; then
ORGX=`echo "scale=2; $BEAM_CENTER_Y/$QX" | bc -l`
ORGY=`echo "scale=2; $BEAM_CENTER_X/$QX" | bc -l`
else
ORGX=`echo "scale=2; $BEAM_CENTER_X/1" | bc -l`
ORGY=`echo "scale=2; $BEAM_CENTER_Y/1" | bc -l`
fi
DETECTOR_DISTANCE=`grep ^DISTANCE tmp2 | sed s/DISTANCE=//`
OSCILLATION_RANGE=`grep OSC_RANGE tmp2 | sed s/OSC_RANGE=//`
STARTING_ANGLE=`grep OSC_START tmp2 | sed s/OSC_START=//`
echo --- For TIMEPIX detector, please fix ROTATION_AXIS yourself!
DIRECTION_OF_DETECTOR_X_AXIS="1 0 0"
REFINE_CORRECT="ORIENTATION CELL AXIS BEAM ! for ED, no POSITION when CELL is refined"
elif [ "$DET" == "pilatus" ]; then
echo Data from a Pilatus detector
OVERLOAD=1048574
SEPMIN=4
CLUSTER_RADIUS=2
grep -q Count_cutoff tmp2 && OVERLOAD=`awk '/Count_cutoff/{print $2;exit}' tmp2`
DETECTOR="PILATUS MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD= $OVERLOAD !PILATUS"
QX=0.172 QY=0.172
# the default above guards against missing Pixel_size line in CBF header
grep -q Pixel_size tmp2 && QX=`awk '/Pixel_size/{print 1000*$2;exit}' tmp2`
grep -q Pixel_size tmp2 && QY=`awk '/Pixel_size/{print 1000*$5;exit}' tmp2`
# find SENSOR_THICKNESS:
SENSOR_THICKNESS=`grep thickness tmp2 | sed -e s/'Si.* sensor, thickness'// | awk '{print $1*1000}'`
# find X_RAY_WAVELENGTH:
X_RAY_WAVELENGTH=`grep Wavelength tmp2 | sed -e s/Wavelength// -e s/A// | awk '{print $1}'`
# find NX and NY; 2463/2527 is 6M, 1475/1679 is 2M
NX=`grep X-Binary-Size-Fastest-Dimension tmp2 | awk '{print $2}'`
NY=`grep X-Binary-Size-Second-Dimension tmp2 | awk '{print $2}'`
# find ORGX and ORGY:
ORGX=`grep Beam_xy tmp2 | sed -e s/\(// -e s/\)// -e s/\,// | awk '{print $2}'`
ORGY=`grep Beam_xy tmp2 | sed -e s/\(// -e s/\)// -e s/\,// | awk '{print $3}'`
# find DETECTOR_DISTANCE, OSCILLATION_RANGE, and STARTING_ANGLE:
DETECTOR_DISTANCE=`awk '/Detector_distance/{print $2;exit}' tmp2`
DETECTOR_DISTANCE=`echo "$DETECTOR_DISTANCE*1000" | bc -l`
OSCILLATION_RANGE=`awk '/Angle_increment/{print $2;exit}' tmp2`
STARTING_ANGLE=`awk '/Start_angle/{print $2;exit}' tmp2`
# get detector serial number and check if it is included in the list
# Known detectors for reversed-phi in SPring-8: BL41XU PILATUS3 6M 60-0125
# Known detectors for reversed-phi in APS: 19ID PILATUS3 6M 60-0132
# Known detectors for reversed-phi at MX2 beamline (Brazilian Synchrotron National Laboratory - LNLS)
# Known detectors for reversed-phi at CHESS F1 PILATUS3 6M, S/N 60-0127
# Known detectors for reversed-phi at SSRF BL18U1 (S/N 60-0123) and BL19U1 (S/N XX-XXX) (!; 2019-10-19: staff will fix this)
DET_SN=`grep "Detector:" tmp2 | sed "s/^.*Detector: *//"`
REVERSEPHI_SNs="
PILATUS3 6M, S/N 60-0125
PILATUS3 6M, S/N 60-0132
PILATUS 2M, S/N 24-0109
PILATUS3 6M, S/N 60-0127
PILATUS3 6M, S/N 60-0123
"
if echo "${DET_SN}${REVERSEPHI_SNs}" | sort | uniq -d | grep [0-9] > /dev/null; then
REVERSE_PHI="yes"
echo inverted ROTATION_AXIS since detector serial number is ${DET_SN}
fi
if [ "$DET_SN" == "PILATUS XXX, S/N XX-XXX" ] ; then
REVERSE_PHI="yes"
echo inverted rotation axis at SSRF BL19U1
fi
# Diamond I24:
if [ "$DET_SN" == "PILATUS3 6M, S/N 60-0119" ] ; then
if grep -q "Oscillation_axis X.CW +SLOW" tmp2 ; then
ROTATION_AXIS="0 -1 0"
echo ROTATION_AXIS="0 -1 0" at Diamond I24
fi
fi
# PETRA P14: raw data from Eiger are stored as CBF files so this is treated as Pilatus
if [ "$DET_SN" == "Dectris Eiger 4M, E-08-0107" -o "$DET_SN" == "PILATUS 6M-F, S/N 60-0115-F" \
-o "$DET_SN" == "Dectris EIGER2 CdTe 16M, E-32-0129" ] ; then
ROTATION_AXIS="0 -1 0"
echo ROTATION_AXIS="0 -1 0" at PETRA P14
fi
# similarly, Eiger 16M at PETRA P14 until May 22, 2021
if [ "$DET_SN" == "Dectris Eiger 16M, E-32-0107" ] ; then
egrep -q '^# 2020-|^# 2021-0[1-5]|^# 2021-06-[01]|^# 2021-06-2[01]' tmp2 || isatP13=1
if [ "$isatP13" == 1 ] ; then
echo using the default ROTATION_AXIS=1 0 0 at PETRA P13
else
ROTATION_AXIS="0 -1 0"
echo ROTATION_AXIS="0 -1 0" at PETRA P14
fi
fi
# ESRF ID23-2:
if [ "$DET_SN" == "PILATUS3 2M, S/N 24-0118, ESRF ID23" ] ; then
ROTATION_AXIS="0 -1 0"
echo ROTATION_AXIS="0 -1 0" at ESRF ID23-2
fi
elif [ "$DET" == "eiger" ]; then
nframes=`h5dump -d "/entry/instrument/detector/detectorSpecific/nimages" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
DATA_RANGE="1 $nframes"
SPOT_RANGE="1 `echo "scale=0; if (${nframes}<2) 1; if (${nframes}>1) ${nframes}/2"|bc -l`"
DET_SN=`h5dump -d "/entry/instrument/detector/detector_number" $FIRSTFRAME | awk '/\(0\): /{print $2}' | sed s/\"//g`
echo detector serial number is $DET_SN
# find out if HDF5 from Diamond (DLS=1) or Dectris (DLS=0)
DLS=0
OVERLOAD=`h5dump -d "/entry/instrument/detector/detectorSpecific/countrate_correction_count_cutoff" $FIRSTFRAME 2>/dev/null` || DLS=1
if [ "$DLS" == 1 ]; then
echo Eiger HDF5 from Diamond
# unfortunately h5dump 1.10 is required to get this right for the DLS .h5 files. This version is available at DLS but maybe not elsewhere
OVERLOAD=`h5dump -d "/entry/instrument/detector/saturation_value" $FIRSTFRAME | awk '/\(0\):/{print $2}'`
# v0.95: fix the next 2 lines by taking care of negative values with the \- , and stop after first "(0)"
OSCILLATION_RANGE=`h5dump -d "/entry/data/omega" $FIRSTFRAME | awk '/\(0\): [\-0-9]/{print $3-$2;exit}'`
STARTING_ANGLE=`h5dump -d "/entry/data/omega" $FIRSTFRAME | awk '/\(0\): [\-0-9]/{print $2;exit}' | sed -e "s/,//"`
echo OSCILLATION_RANGE=$OSCILLATION_RANGE STARTING_ANGLE=$STARTING_ANGLE
# ROTATION_AXIS=`h5dump -a "/entry/sample/transformations/omega/vector" $FIRSTFRAME 2>/dev/null | grep "(0):" | sed -e "s/^.*://; s/,//g"`
# the above gives -1 0 0 for DLS data instead of the correct 1 0 0, so commented out for now
# comment while implementing rev 1.10: this is because the DLS headers are NeXus, so DIRECTION_OF_DETECTOR_X/Y_AXIS must be adjusted.
else
echo Eiger HDF5 from Dectris
OVERLOAD=`h5dump -d "/entry/instrument/detector/detectorSpecific/countrate_correction_count_cutoff" $FIRSTFRAME | awk '/\(0\):/{print $2}'`
OSCILLATION_RANGE=`h5dump -d "/entry/sample/goniometer/omega_range_average" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
# STARTING_ANGLE: the \- was introduced in version 0.91 to allow negative values :
STARTING_ANGLE=`h5dump -d "/entry/sample/goniometer/omega_start" $FIRSTFRAME 2>/dev/null | awk '/\(0\): [\-0-9]/{print $2}'`
# /entry/sample/goniometer/omega_start is missing in some eiger2 detectors (e.g. Eiger2 9M with fw version release-2020.2.1 and SIMPLON API 1.8) (Feng YU 2021-07-18)
if [ "$STARTING_ANGLE" == "" ]; then
echo "/entry/sample/goniometer/omega_start not found, trying /entry/sample/goniometer/omega"
STARTING_ANGLE=`h5dump -d /entry/sample/goniometer/omega $FIRSTFRAME | grep "(0):" | head -n 1 | awk '{print $2}' | sed -e "s/,//g"`
fi
# If rotation axis set (NeXus)
ROTATION_AXIS=`h5dump -a "/entry/sample/transformations/omega/vector" $FIRSTFRAME 2>/dev/null | grep "(0):" | sed -e "s/^.*://; s/,//g"`
# EIGER2 16M CHESS ID7B2 has S/N E-32-0123 (A. Finke 2020-11-07) v0.99
if [ "$DET_SN" == "E-32-0123" ]; then
ROTATION_AXIS="-1 0 0"
echo CHESS ID7B2 with inverted rotation axis
fi
# SSRF BL17U1 and SSRF BL10U2 (Feng YU 2021-07-18)
# Eiger X 16M (S/N E-32-0111) was installed at SSRF BL17U1 from Oct 2017 to Feb 2021. After Feb 2021, it was moved back to SSRF BL10U2.
# 2021-03-01 00:00:00 time stamp is 1614528000
if [ "$DET_SN" == "E-32-0111" ]; then
collection_time=`h5dump -d "/entry/instrument/detector/detectorSpecific/data_collection_date" $FIRSTFRAME | grep "(0):" | awk '{print $2}' | sed -e "s/\.\(.*\)//g; s/\"//g"`
if [ `uname -s` == "Darwin" ]; then
collection_timestamp=`date -j -f "%Y-%m-%dT%H:%M:%S" $collection_time +%s`
elif [ `uname -s` == "Linux" ]; then
collection_timestamp=`date -d $collection_time +%s`
else
collection_timestamp=0
fi
if [ $collection_timestamp -eq 0 ]; then
is_ROTATION_AXIS_set=1
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME 2>/dev/null || is_ROTATION_AXIS_set=0`
if [ "$is_ROTATION_AXIS_set" == "1" ]; then
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME | grep "(0):" | sed -e "s/^.*://; s/,//g"`
echo "The rotation axis of SSRF BL10U2 (Eiger X 16M) is $ROTATION_AXIS"
else
ROTATION_AXIS="-1 0 0 ! Cannot determine rotation axis. SSRF BL17U1: -1 0 0; SSRF BL02U1: 0 -1 0"
fi
elif [ $collection_timestamp -ge 0 ] && [ $collection_timestamp -le 1614528000 ]; then
# SSRF BL17U1
ROTATION_AXIS="-1 0 0"
echo "SSRF BL17U1 (Eiger X 16M) with inverted rotation axis"
else
# SSRF BL10U2
is_ROTATION_AXIS_set=1
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME 2>/dev/null || is_ROTATION_AXIS_set=0`
if [ "$is_ROTATION_AXIS_set" == "1" ]; then
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME | grep "(0):" | sed -e "s/^.*://; s/,//g"`
echo "The rotation axis of SSRF BL10U2 (Eiger X 16M) is $ROTATION_AXIS"
else
ROTATION_AXIS="0 -1 0"
echo "SSRF BL10U2 (Eiger X 16M) with vertical rotation axis"
fi
fi
fi
# SSRF BL02U1 (Feng YU 2021-07-18)
# EIGER2 S 9M SSRF BL02U1 has S/N E-18-0121
if [ "$DET_SN" == "E-18-0121" ]; then
is_ROTATION_AXIS_set=1
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME 2>/dev/null || is_ROTATION_AXIS_set=0`
if [ "$is_ROTATION_AXIS_set" == "1" ]; then
ROTATION_AXIS=`h5dump -d "/SSRF/RotationAxis" $FIRSTFRAME | grep "(0):" | sed -e "s/^.*://; s/,//g"`
echo "The rotation axis of SSRF BL02U1 (Eiger2 S 9M) is $ROTATION_AXIS"
else
ROTATION_AXIS="1 0 0"
echo "SSRF BL02U1 (Eiger2 S 9M) with horizontal rotation axis"
fi
fi
# revision 1.05 specialcase nframes for Eiger detectors at BNL
if [ "$DET_SN" == "E-18-0104" -o "$DET_SN" == "E-32-0101" ]; then
nframes=`h5dump -A -g "/entry/data" $FIRSTFRAME | grep "DATASPACE SIMPLE" | sed -e "s/,.*//" | awk '{a+=$5}END{print a}'`
DATA_RANGE="1 $nframes"
SPOT_RANGE="1 `echo "scale=0; if (${nframes}<2) 1; if (${nframes}>1) ${nframes}/2"|bc -l`"
echo Special case nframes for Eiger detectors at BNL: nframes=$nframes
fi
fi
# rev 1.10: check for NeXus header. If found, its geometry will overwrite any ROTATION_AXIS set until here.
NeXus=0
h5dump -d "/entry/definition" $FIRSTFRAME 2>/dev/null | grep -q NXmx && NeXus=1
if [ "$NeXus" == "1" ]; then
echo NeXus header found. This defines DIRECTION_OF_DETECTOR_X/Y-AXIS and ROTATION_AXIS.
DIRECTION_OF_DETECTOR_X_AXIS=$(h5dump -d "/entry/instrument/detector/module/fast_pixel_direction" $FIRSTFRAME 2>/dev/null | grep "(0):" | tail -1 | sed -e "s/^.*://; s/,//g")
DIRECTION_OF_DETECTOR_Y_AXIS=$(h5dump -d "/entry/instrument/detector/module/slow_pixel_direction" $FIRSTFRAME 2>/dev/null | grep "(0):" | tail -1 | sed -e "s/^.*://; s/,//g")
ROTATION_AXIS=$(h5dump -a "/entry/sample/transformations/omega/vector" $FIRSTFRAME 2>/dev/null | grep "(0):" | sed -e "s/^.*://; s/,//g")
else
echo no NeXus header found.
fi
echo DATA_RANGE=$DATA_RANGE
DETECTOR="EIGER MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD= $OVERLOAD"
QX=`h5dump -d "/entry/instrument/detector/x_pixel_size" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2*1000}'`
QY=`h5dump -d "/entry/instrument/detector/y_pixel_size" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2*1000}'`
echo OVERLOAD=$OVERLOAD
SENSOR_THICKNESS=`h5dump -d "/entry/instrument/detector/sensor_thickness" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2*1000}'`
X_RAY_WAVELENGTH=`h5dump -d "/entry/instrument/beam/incident_wavelength" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
NX=`h5dump -d "/entry/instrument/detector/detectorSpecific/x_pixels_in_detector" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
NY=`h5dump -d "/entry/instrument/detector/detectorSpecific/y_pixels_in_detector" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
# find ORGX and ORGY:
ORGX=`h5dump -d "/entry/instrument/detector/beam_center_x" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
ORGY=`h5dump -d "/entry/instrument/detector/beam_center_y" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2}'`
# find DETECTOR_DISTANCE :
DETECTOR_DISTANCE=`h5dump -d "/entry/instrument/detector/detector_distance" $FIRSTFRAME | awk '/\(0\): [0-9]/{print $2*1000}'`
SEPMIN=4
CLUSTER_RADIUS=2
elif [ "$DET" == "raxis" ]; then
echo Data from a RAXIS detector
DETECTOR="RAXIS MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD=2000000"
#let SKIP=768
#NX=$(od -t x -j $SKIP -N 4 $FIRSTFRAME |awk 'NR==1{print toupper($2)}'|perl -nle '@array= $_ =~/.{2}/g; print "ibase=16;obase=A;".join("",reverse @array)'|bc)
NX=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(768);print("%.4d"%struct.unpack(">i",f.read(4)))')
NY=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(772);print("%.4d"%struct.unpack(">i",f.read(4)))')
DETECTOR_DISTANCE=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(344);print("-%.4f"%struct.unpack(">f",f.read(4)))')
ORGX=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(540);print("%.4f"%struct.unpack(">f",f.read(4)))')
ORGY=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(544);print("%.4f"%struct.unpack(">f",f.read(4)))')
OSCILLATION_RANGE=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(524);phis,phie=struct.unpack(">ff",f.read(8));print("%.4f"%(phie-phis))')
QX=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(776);print("%.6f"%struct.unpack(">f",f.read(4)))')
QY=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(780);print("%.6f"%struct.unpack(">f",f.read(4)))')
X_RAY_WAVELENGTH=$(python -c 'import struct; f=open("'$FIRSTFRAME'","rb");f.seek(292);print("%.6f"%struct.unpack(">f",f.read(4)))')
DIRECTION_OF_DETECTOR_Y_AXIS="0 -1 0"
POLARIZATION_PLANE_NORMAL="1 0 0"
ROTATION_AXIS="0 1 0"
elif [ "$DET" == "dtrek" ]; then
dname=`grep "DETECTOR_NAMES=" tmp2 | sed -e "s/.*=//"`
if [ "$dname" == "CCD_" ]; then
DETECTOR="SATURN MINIMUM_VALID_PIXEL_VALUE=1"
dtrek_det="saturn"
elif [ "$dname" == "PILT_" ]; then
DETECTOR="PILATUS MINIMUM_VALID_PIXEL_VALUE=0"
dtrek_det="pilatus"
SEPMIN=3
CLUSTER_RADIUS=1.5
SENSOR_THICKNESS=$(awk 'match($0,/SENSOR_THICKNESS= *(\S*)/,a){printf"%.3f",1000*a[1];exit}ENDFILE{print "0.45"}' tmp2)
elif [ "$dname" == "RX_" ]; then
DETECTOR="RAXIS MINIMUM_VALID_PIXEL_VALUE=0"
dtrek_det="raxis"
POLARIZATION_PLANE_NORMAL="1 0 0"
ROTATION_AXIS="0 1 0"
else
DETECTOR="XXX MINIMUM_VALID_PIXEL_VALUE=XXX"
dtrek_det="unknown"
echo "WARNING: Unsupported dTREK detector, check parameters"
fi
DET_SN=`awk '/_DETECTOR_IDENTIFICATION=/{print;exit}' tmp2 | sed 's/.*DETECTOR_IDENTIFICATION=//'`
echo "Data from a $dtrek_det detector with dTREK format, ID=$DET_SN"
# Find rotation axis and flipping
# I'm not sure this method is really valid - but at least mosflm seems to read this to determine rotation axis.
tmpmat=(`grep ${dname}SPATIAL_DISTORTION_VECTORS= tmp2 | tail -1 | sed -e "s/.*=//"`)
flip=`echo "(${tmpmat[0]}*${tmpmat[3]}-(${tmpmat[1]}*${tmpmat[2]}))/1"|bc`
if [ "$flip" -ne 1 -a "$flip" -ne -1 ]; then
echo ""
echo "WARNING!! not-supported SPATIAL_DISTORTION_VECTORS header."
echo "Please report this to XDSwiki author."
echo ""
elif [ "$flip" -eq -1 ]; then
echo "Detector is flipped (from SPATIAL_DISTORTION_VECTORS header)"
fi
rotx=`echo "scale=6; -1.0*$flip*${tmpmat[0]}" | bc -l`
roty=`echo "scale=6; -1.0*$flip*${tmpmat[1]}" | bc -l`
ROTATION_AXIS="$rotx $roty 0"
# 2theta
TWOTHETA=`awk '/'${dname}'GONIO_VALUES=/{print $2;exit}' tmp2`
R1=`echo "scale=7; $flip*-c($TWOTHETA/$DEGTOR)" | bc -l`
R3=`echo "scale=7; $flip* s($TWOTHETA/$DEGTOR)" | bc -l`
DIRECTION_OF_DETECTOR_X_AXIS="$R1 0 $R3"
echo "Detector 2-theta = $TWOTHETA "
echo DIRECTION_OF_DETECTOR_X_AXIS="$R1 0 $R3"
# find OVERLOAD
SATURATED_VALUE=`grep SATURATED_VALUE tmp2 | head -1 | sed s/SATURATED_VALUE=//`
DETECTOR="${DETECTOR} OVERLOAD=${SATURATED_VALUE}"
# find X_RAY_WAVELENGTH:
X_RAY_WAVELENGTH=(`grep SOURCE_WAVELENGTH tmp2 | head -1 | sed s/SOURCE_WAVELENGTH=//`)
X_RAY_WAVELENGTH=${X_RAY_WAVELENGTH[1]}
# find NX,NY,QX,QY
# NX,NY should be read from *_DETECTOR_DIMENSIONS?
NX=`grep SIZE1 tmp2 | tail -1 | sed s/SIZE1=//`
NY=`grep SIZE2 tmp2 | tail -1 | sed s/SIZE2=//`
DET_SIZE=(`grep ${dname}DETECTOR_SIZE tmp2 | tail -1 | sed s/.*_DETECTOR_SIZE=//`)
QX=`echo "scale=6; ${DET_SIZE[0]} / $NX" | bc -l`
QY=`echo "scale=6; ${DET_SIZE[1]} / $NY" | bc -l`
# find ORGX, ORGY
SPATIAL_DISTORTION_INFO=(`grep ${dname}SPATIAL_DISTORTION_INFO tmp2 | tail -1 | sed s/.*_SPATIAL_DISTORTION_INFO=//`)
ORGX=${SPATIAL_DISTORTION_INFO[0]}
ORGY=${SPATIAL_DISTORTION_INFO[1]}
# find DETECTOR_DISTANCE
GONIO_NAMES=(`grep ${dname}GONIO_NAMES= tmp2 | tail -1 | sed s/.*_GONIO_NAMES=//`)
GONIO_VALUES=(`grep ${dname}GONIO_VALUES= tmp2 | tail -1 | sed s/.*_GONIO_VALUES=//`)
# GONIO_UNITS=(`grep ${dname}GONIO_UNITS= tmp2 | tail -1 | sed s/.*_GONIO_UNITS=//`)
for i in `seq 1 ${#GONIO_NAMES[*]}`
do
idx=$((i-1))
if [ "${GONIO_NAMES[$idx]}" == "Distance" ]; then
if [ $flip -gt 0 ]; then
DETECTOR_DISTANCE="-${GONIO_VALUES[$idx]}"
echo "Detector not flipped; using negative distance"
else
DETECTOR_DISTANCE="${GONIO_VALUES[$idx]}"
echo "Detector flipped; using positive distance"
fi
break
fi
done
# find OSCILLATION start and range
ROTATION=(`grep "^ROTATION=" tmp2 | tail -1 | sed s/ROTATION=//`)
STARTING_ANGLE=${ROTATION[0]}
OSCILLATION_RANGE=${ROTATION[2]}
elif [ "$DET" == "MAR345" ]; then
echo "Data from a Mar345 image plate detector"
DETECTOR="MAR345 MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD=130000"
NX=`awk '/FORMAT/{print $2;exit}' tmp2`
# next line is rev 1.02 (previously NY= $NX):
NY=`awk -v NX=$NX '/FORMAT/{print $4/NX;exit}' tmp2`
QX=`awk '/PIXEL/{print $3/1000.;exit}' tmp2`
QY=`awk '/PIXEL/{print $5/1000.;exit}' tmp2`
if grep -q 'CENTER' tmp2; then
echo Beam center found.
ORGX=`grep 'CENTER' tmp2 | awk '{print $3}'`
ORGY=`grep 'CENTER' tmp2 | awk '{print $5}'`
else
echo No beam center was found. Setting beam center to the middle of the detector.
ORGX=`echo $NX / 2 | bc`
ORGY=`echo $NY / 2 | bc`
fi
DETECTOR_DISTANCE=`grep 'DISTANCE' tmp2 | awk '{print $2}'`
X_RAY_WAVELENGTH=`grep 'WAVELENGTH' tmp2 | awk '{print $2}'`
OSCILLATION_RANGE=`grep 'PHI' tmp2 | awk '{print $5-$3}'`
TRUSTED_REGION="0 0.99"
elif [ "$DET" == "OLDMAR" ]; then
echo "Data from old type MAR image plate detector"
DETECTOR="MAR MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD=130000"
NX=`awk 'NR==2 {print $2;exit}' tmp2`
NY=$NX
QX=`awk 'NR==2 {print $15;exit}' tmp2`
QY=$QX
ORGX=`awk 'NR==2 {print $19;exit}' tmp2`
ORGY=`awk 'NR==2 {print $20;exit}' tmp2`
DETECTOR_DISTANCE=`awk 'NR==2 {print $22;exit}' tmp2`
X_RAY_WAVELENGTH=`awk 'NR==2 {print $21;exit}' tmp2`
OSCILLATION_RANGE=`awk 'NR==2 {print $24-$23;exit}' tmp2`
TRUSTED_REGION="0 0.99"
ROTATION_AXIS="0 1 0"
echo unsure if sign of anomalous signal is correct - please verify or try both hands!
elif [ "$DET" == "Bruker-cbf" ]; then
echo "Data from a Bruker-cbf detector"
# MINIMUM_NUMBER_OF_PIXELS_IN_A_SPOT:
MNOPIAS=6
# use complete detector including corners:
TRUSTED_REGION="0 1.42"
# polarization
pol_frac=`awk '/polarizn_source_ratio/{print $2;exit}' tmp2`
pol_frac=`echo "${pol_frac}+0.5" | bc -l`
OVERLOAD=`awk '/_array_intensities.overload/{print $2;exit}' tmp2`
DETECTOR="BRUKER MINIMUM_VALID_PIXEL_VALUE=0 OVERLOAD=${OVERLOAD}"
NX=`awk '/X-Binary-Size-Fastest-Dimension/{print $2;exit}' tmp2`
NY=`awk '/X-Binary-Size-Second-Dimension/{print $2;exit}' tmp2`
QX=`awk '/ELEMENT_X ELEMENT_X/{print $4;exit}' tmp2`
QY=`awk '/ELEMENT_Y ELEMENT_Y/{print $4;exit}' tmp2`
# ORGX/Y-offsets relative to center of detector:
ORGX=`grep " 0 0 ? ? ?" tmp2 | awk '/ H /{print $2}'`
ORGY=`grep " 0 0 ? ? ?" tmp2 | awk '/ V /{print $2}'`
# total ORGX/Y
ORGX=`echo "scale=2; ${NX}/2+($ORGX/$QX)" | bc -l`
ORGY=`echo "scale=2; ${NY}/2-($ORGY/$QY)" | bc -l`
DETECTOR_DISTANCE=`grep "0 0 ? ? ?" tmp2 | awk '/DX /{print $2}'`
X_RAY_WAVELENGTH=`awk '/diffrn_radiation_wavelength.wavelength/{print $2;exit}' tmp2`
# fix 16.3.20: instead of print, use printf "%.5f", because bc does not accept e.g. 3.1e-005
OMEGA=`awk '/OMEGA \? \? \?/{printf "%.5f",$5;exit}' tmp2`
DELTAOMEGA=`awk '/OMEGA \? \? \?/{printf "%.5f",$6;exit}' tmp2`
PHI=`awk '/PHI \? \? \?/{printf "%.5f",$5;exit}' tmp2`
DELTAPHI=`awk '/PHI \? \? \?/{printf "%.5f",$6;exit}' tmp2`
KAPPA=`awk '/CHI \? \? \?/{printf "%.5f",$5;exit}' tmp2`
# echo OMEGA DELTAOMEGA PHI DELTAPHI KAPPA= $OMEGA $DELTAOMEGA $PHI $DELTAPHI $KAPPA
# test whether the absolute value of deltaphi is > absolute value of deltaomega
if (( $(echo "${DELTAPHI}^2 > ${DELTAOMEGA}^2"|bc -l) )); then
echo PHI scan
R3=`echo "scale=7; s($KAPPA/$DEGTOR)*s($OMEGA/$DEGTOR)" | bc -l`
R1=`echo "scale=7; s($KAPPA/$DEGTOR)*c($OMEGA/$DEGTOR)" | bc -l`
R2=`echo "scale=7; c($KAPPA/$DEGTOR) " | bc -l`
ROTATION_AXIS="$R1 $R2 $R3"
OSCILLATION_RANGE=${DELTAPHI}
STARTING_ANGLE=${PHI}
# here we could check if DELTAPHI is <0, and if so, negate it and ROTATION_AXIS
else
echo OMEGA scan
ROTATION_AXIS="0 -1 0"
OSCILLATION_RANGE=${DELTAOMEGA}
STARTING_ANGLE=${OMEGA}
# here we could check if DELTAOMEGA is <0, and if so, negate it and ROTATION_AXIS
fi
# 2theta
TWOTHETA=`awk '/TWOTHETA \? \? \?/{print $5;exit}' tmp2`
echo TWOTHETA=$TWOTHETA
R1=`echo "scale=7; c($TWOTHETA/$DEGTOR)" | bc -l`
R3=`echo "scale=7; s($TWOTHETA/$DEGTOR)" | bc -l`
DIRECTION_OF_DETECTOR_X_AXIS="$R1 0 $R3"
# end of Bruker-cbf section
else
echo should never come here
exit 1
fi
echo ORGX= $ORGX ORGY= $ORGY - check these values with adxv or xdsgui !
echo DETECTOR_DISTANCE= $DETECTOR_DISTANCE ! only read by XYCORR, IDXREF
echo STARTING_ANGLE= $STARTING_ANGLE ! only read by IDXREF
echo OSCILLATION_RANGE= $OSCILLATION_RANGE ! only read by IDXREF
echo X-RAY_WAVELENGTH= $X_RAY_WAVELENGTH ! only read by IDXREF
if (( $(echo "$X_RAY_WAVELENGTH > 1.54 && $X_RAY_WAVELENGTH < 1.55" |bc -l) )); then
echo "Copper K-alpha source, FRACTION_OF_POLARIZATION commented out"
not_synchrotron='!'
fi
if [ "$DET" == "eiger" ] && [ "$is_h5" == 1 ]; then
if [ "$DLS" == 0 ] ; then
neggia_path=${NEGGIA_PATH-/usr/local/lib64/dectris-neggia.so}
if [ -e $neggia_path ]; then
LIB="LIB=$neggia_path"
echo "LIB= <dectris-neggia> was written to XDS.INP . Check the path! For Apple M1 processors, modify the name or set \$NEGGIA_PATH."
else
LIB="!LIB=/usr/local/lib64/dectris-neggia.so"
echo "dectris-neggia.so not found. Specify LIB=<path-to-dectris-neggia> in XDS.INP -- set \$NEGGIA_PATH to specify the path!"
fi
else
durin_path=${DURIN_PATH-/usr/local/lib64/durin-plugin.so}
if [ -e $durin_path ]; then
LIB="LIB=$durin_path"
echo "LIB= <durin-plugin> was written to XDS.INP . Check the path! For Apple M1 processors, modify the name or set \$NEGGIA_PATH."
else
LIB="!LIB=/usr/local/lib64/durin-plugin.so"
echo "durin-plugin.so not found. Specify LIB=<path-to-durin-plugin> in XDS.INP -- set \$NEGGIA_PATH to specify the path!"
fi
fi
fi
if [ "$ROTATION_AXIS" != "" ]; then
ROTATION_AXIS="$ROTATION_AXIS ! only read by IDXREF"
elif [ "$REVERSE_PHI" == "no" ]; then
ROTATION_AXIS='1 0 0 ! Australian Synchrotron, SERCAT ID-22 (?), APS 19-ID (?), ESRF BM30A, SPring-8, SSRF need -1 0 0. Diamond ID24 needs 0 -1 0'
else
ROTATION_AXIS='-1 0 0 ! Default; if this is wrong, please contact author.'
fi
# Append 2-theta comment if defined
if (( $(echo "${TWOTHETA}0 != 0"|bc -l) )); then
COMMENT_ORGXY="$COMMENT_ORGXY
! TWOTHETA=$TWOTHETA -- if fails, check DIRECTION_OF_DETECTOR_X-AXIS"
fi
# now we know almost everything that is required to generate XDS.INP
cat > XDS.INP << eof
!=============================================================================
! written by generate_XDS.INP version $REVISION
! For more details on XDS parameters, please check the online documentation at
! http://xds.mpimf-heidelberg.mpg.de/html_doc/xds_parameters.html
!
! Full documentation, including complete detector templates, at xds.mr.mpg.de .
! More documentation in strucbio.biologie.uni-konstanz.de/xdswiki/index.php .
! After running xds, inspect at least the agreement of predicted and observed
! spots in FRAME.cbf!
!=============================================================================
JOB= XYCORR INIT COLSPOT IDXREF DEFPIX INTEGRATE CORRECT
ORGX= $ORGX ORGY= $ORGY ! values from frame header; only read by XYCORR, IDXREF
$COMMENT_ORGXY
DETECTOR_DISTANCE= $DETECTOR_DISTANCE !read by XYCORR, IDXREF. Negative if detector normal points to crystal.
OSCILLATION_RANGE= $OSCILLATION_RANGE
STARTING_ANGLE= $STARTING_ANGLE
X-RAY_WAVELENGTH= $X_RAY_WAVELENGTH
NAME_TEMPLATE_OF_DATA_FRAMES=$NAME_TEMPLATE_OF_DATA_FRAMES
! REFERENCE_DATA_SET=xxx/XDS_ASCII.HKL ! e.g. to ensure consistent indexing
DATA_RANGE=$DATA_RANGE
SPOT_RANGE=$SPOT_RANGE
! BACKGROUND_RANGE=1 10 ! rather use defaults (first 5 degree of rotation)
SPACE_GROUP_NUMBER=0 ! 0 if unknown
UNIT_CELL_CONSTANTS= 70 80 90 90 90 90 ! put correct values if known
INCLUDE_RESOLUTION_RANGE=50 0 ! after CORRECT, insert high resol limit; re-run CORRECT
! IDXREF now obeys INCLUDE_RESOLUTION_RANGE and EXCLUDE_RESOLUTION_RANGE to exclude ice-rings
FRIEDEL'S_LAW=FALSE ! This acts only on the CORRECT step
! If the anom signal turns out to be, or is known to be, very low or absent,
! use FRIEDEL'S_LAW=TRUE instead (or comment out the line); re-run CORRECT
! remove the "!" in the following line:
! STRICT_ABSORPTION_CORRECTION=TRUE
! if the anomalous signal is strong: in that case, in CORRECT.LP the three
! "CHI^2-VALUE OF FIT OF CORRECTION FACTORS" values are significantly> 1, e.g. 1.5
!
! exclude (mask) untrusted areas of detector, e.g. beamstop shadow :
! UNTRUSTED_RECTANGLE= 1800 1950 2100 2150 ! x-min x-max y-min y-max ! repeat
! UNTRUSTED_ELLIPSE= 2034 2070 1850 2240 ! x-min x-max y-min y-max ! if needed
! UNTRUSTED_QUADRILATERAL= x1 y1 x2 y2 x3 y3 x4 y4 ! see documentation
!
! parameters with changes wrt default values:
TRUSTED_REGION=$TRUSTED_REGION
VALUE_RANGE_FOR_TRUSTED_DETECTOR_PIXELS=6000. 30000. ! often 7000 or 8000 is ok
STRONG_PIXEL=4 ! COLSPOT: only use strong reflections (default is 3)
MINIMUM_NUMBER_OF_PIXELS_IN_A_SPOT=$MNOPIAS ! default of 6 is sometimes too high
! close spots/long cell axis: reduce SEPMIN and CLUSTER_RADIUS from their defaults of 7 and 3.5
SEPMIN=$SEPMIN CLUSTER_RADIUS=$CLUSTER_RADIUS ! 4 and 2 for Pixel Array Detectors
! since XDS 01-MAR-2015, POSITION supersedes DISTANCE.
! nowadays headers are usually correct so refine POSITION in INTEGRATE but not IDXREF if low to medium resolution
! however, if the spots from COLSPOT extend to 2A then POSITION could, and if 1.5A POSITION should be refined
REFINE(IDXREF)=CELL BEAM ORIENTATION AXIS ! add POSITION if high resolution, or DETECTOR_DISTANCE inaccurate
REFINE(INTEGRATE)= POSITION BEAM ORIENTATION ! AXIS CELL . If 1.5A or higher it is ok to refine CELL (unless electron diffraction)
REFINE(CORRECT)= $REFINE_CORRECT
! parameters specifically for this detector and beamline:
DETECTOR= $DETECTOR
SENSOR_THICKNESS= $SENSOR_THICKNESS
! attention CCD detectors: for very high resolution (better than 1A) make sure to specify SILICON
! as about 32* what CORRECT.LP suggests (absorption of phosphor is much higher than that of silicon).
! Better: read the article http://strucbio.biologie.uni-konstanz.de/xdswiki/index.php/SILICON .
NX= $NX NY= $NY QX= $QX QY= $QY ! to make CORRECT happy if frames are unavailable
$LIB
ROTATION_AXIS=$ROTATION_AXIS
DIRECTION_OF_DETECTOR_X-AXIS=$DIRECTION_OF_DETECTOR_X_AXIS
DIRECTION_OF_DETECTOR_Y-AXIS=$DIRECTION_OF_DETECTOR_Y_AXIS
INCIDENT_BEAM_DIRECTION=0 0 1 ! only read by IDXREF
${not_synchrotron}FRACTION_OF_POLARIZATION=${pol_frac} ! comment out if not synchrotron; only use by CORRECT
! better value is provided by beamline staff!
POLARIZATION_PLANE_NORMAL=$POLARIZATION_PLANE_NORMAL ! only used by CORRECT
eof
# --------- Append known detector untrusted regions -----------
cat >> XDS.INP << eof
!used by DEFPIX and CORRECT to exclude ice-reflections / ice rings - uncomment if necessary
!fine-grained list is in Thorn et al http://journals.iucr.org/d/issues/2017/09/00/hi5647/index.html
!EXCLUDE_RESOLUTION_RANGE= 3.93 3.87 !ice-ring at 3.897 Angstrom
!EXCLUDE_RESOLUTION_RANGE= 3.70 3.64 !ice-ring at 3.669 Angstrom
!EXCLUDE_RESOLUTION_RANGE= 3.47 3.41 !ice-ring at 3.441 Angstrom
!EXCLUDE_RESOLUTION_RANGE= 2.70 2.64 !ice-ring at 2.671 Angstrom
!EXCLUDE_RESOLUTION_RANGE= 2.28 2.22 !ice-ring at 2.249 Angstrom
!EXCLUDE_RESOLUTION_RANGE= 2.102 2.042 !ice-ring at 2.072 Angstrom - strong
!EXCLUDE_RESOLUTION_RANGE= 1.978 1.918 !ice-ring at 1.948 Angstrom - weak
!EXCLUDE_RESOLUTION_RANGE= 1.948 1.888 !ice-ring at 1.918 Angstrom - strong
!EXCLUDE_RESOLUTION_RANGE= 1.913 1.853 !ice-ring at 1.883 Angstrom - weak
!EXCLUDE_RESOLUTION_RANGE= 1.751 1.691 !ice-ring at 1.721 Angstrom - weak
! additional ice-ring resolution ranges: 1.524 1.519, 1.473 1.470, 1.444 1.440, 1.372 1.368, 1.367 1.363,
! 1.299 1.296, 1.275 1.274, 1.261 1.259, 1.224 1.222, 1.171 1.168, 1.124 1.122 (compiled by GlobalPhasing)
eof
if [ "$DET" == "Bruker-cbf" ]; then
echo "DELPHI=15 ! refine less often than the default of 5" >> XDS.INP
elif [ "$DET" == "adsc-CMOS1" ]; then
echo UNTRUSTED_RECTANGLE= 0 1468 2451 2631 >> XDS.INP
elif [ "$dtrek_det" == "pilatus" -a "$NX" == 487 -a "$NY" = "407" ]; then
echo UNTRUSTED_RECTANGLE= 1 487 196 212 >> XDS.INP # Dectris Pilatus 200K
elif [ "$DET" == "pilatus" -o "$DET" == "eiger" ]; then
cat >> XDS.INP << eof
NUMBER_OF_PROFILE_GRID_POINTS_ALONG_ALPHA/BETA=13 ! Default is 9 - Increasing may improve data
NUMBER_OF_PROFILE_GRID_POINTS_ALONG_GAMMA=13 ! accuracy, particularly if finely-sliced on phi,
! and does not seem to have any downsides.
eof
if [ "$NX" == "1028" -a "$NY" == "1062" ]; then
# Eiger2 1M ; v0.97 numbers from Andreas Förster
cat >> XDS.INP << eof
UNTRUSTED_RECTANGLE= 0 1029 512 551
eof
elif [ "$NX" == "1475" ]; then
if ! grep -q Flat_field tmp2 ; then
cat >> XDS.INP << eof
! the following specifications are for a detector _without_ proper
! flat_field correction; they cut away one additional pixel adjacent
! to each UNTRUSTED_RECTANGLE
!EXCLUSION OF VERTICAL DEAD AREAS OF THE PILATUS 2M DETECTOR
UNTRUSTED_RECTANGLE= 486 496 0 1680
UNTRUSTED_RECTANGLE= 980 990 0 1680
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE PILATUS 2M DETECTOR
UNTRUSTED_RECTANGLE= 0 1476 194 214
UNTRUSTED_RECTANGLE= 0 1476 406 426
UNTRUSTED_RECTANGLE= 0 1476 618 638
UNTRUSTED_RECTANGLE= 0 1476 830 850
UNTRUSTED_RECTANGLE= 0 1476 1042 1062
UNTRUSTED_RECTANGLE= 0 1476 1254 1274
UNTRUSTED_RECTANGLE= 0 1476 1466 1486
eof
else
cat >> XDS.INP << eof
!EXCLUSION OF VERTICAL DEAD AREAS OF THE PILATUS 2M DETECTOR
UNTRUSTED_RECTANGLE= 487 495 0 1680
UNTRUSTED_RECTANGLE= 981 989 0 1680
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE PILATUS 2M DETECTOR
UNTRUSTED_RECTANGLE= 0 1476 195 213
UNTRUSTED_RECTANGLE= 0 1476 407 425
UNTRUSTED_RECTANGLE= 0 1476 619 637
UNTRUSTED_RECTANGLE= 0 1476 831 849
UNTRUSTED_RECTANGLE= 0 1476 1043 1061
UNTRUSTED_RECTANGLE= 0 1476 1255 1273
UNTRUSTED_RECTANGLE= 0 1476 1467 1485
eof
fi
elif [ "$NX" == "2068" -a "$NY" == "2162" ]; then
# Eiger2 4M ; v0.97 numbers from Andreas Förster
cat >> XDS.INP << eof
!EXCLUSION OF VERTICAL DEAD AREAS OF THE EIGER2 4M DETECTOR
UNTRUSTED_RECTANGLE= 1028 1041 0 2163
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE EIGER 4M DETECTOR
UNTRUSTED_RECTANGLE= 0 2069 512 551
UNTRUSTED_RECTANGLE= 0 2069 1062 1101
UNTRUSTED_RECTANGLE= 0 2069 1612 1651
eof
elif [ "$NX" == "2463" ]; then
# Pilatus 6M
# FIXME: here we could test if a Flat_field correction was applied like we do for 2M
cat >> XDS.INP << eof
UNTRUSTED_RECTANGLE= 487 495 0 2528
UNTRUSTED_RECTANGLE= 981 989 0 2528
UNTRUSTED_RECTANGLE=1475 1483 0 2528
UNTRUSTED_RECTANGLE=1969 1977 0 2528
UNTRUSTED_RECTANGLE= 0 2464 195 213
UNTRUSTED_RECTANGLE= 0 2464 407 425
UNTRUSTED_RECTANGLE= 0 2464 619 637
UNTRUSTED_RECTANGLE= 0 2464 831 849
UNTRUSTED_RECTANGLE= 0 2464 1043 1061
UNTRUSTED_RECTANGLE= 0 2464 1255 1273
UNTRUSTED_RECTANGLE= 0 2464 1467 1485
UNTRUSTED_RECTANGLE= 0 2464 1679 1697
UNTRUSTED_RECTANGLE= 0 2464 1891 1909
UNTRUSTED_RECTANGLE= 0 2464 2103 2121
UNTRUSTED_RECTANGLE= 0 2464 2315 2333
eof
elif [ "$NX" == "3110" -a "$NY" == "3269" ]; then
# Eiger 9M
cat >> XDS.INP << eof
!EXCLUSION OF VERTICAL DEAD AREAS OF THE EIGER 9M DETECTOR
UNTRUSTED_RECTANGLE= 1029 1042 0 3269
UNTRUSTED_RECTANGLE= 2069 2082 0 3269
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE EIGER 9M DETECTOR
UNTRUSTED_RECTANGLE= 0 3110 513 553
UNTRUSTED_RECTANGLE= 0 3110 1064 1104
UNTRUSTED_RECTANGLE= 0 3110 1615 1655
UNTRUSTED_RECTANGLE= 0 3110 2166 2206
UNTRUSTED_RECTANGLE= 0 3110 2717 2757
eof
elif [ "$NX" == "3108" -a "$NY" == "3262" ]; then
# Eiger2 9M ; v0.97 numbers from Andreas Förster
cat >> XDS.INP << eof
!EXCLUSION OF VERTICAL DEAD AREAS OF THE EIGER2 9M DETECTOR
UNTRUSTED_RECTANGLE= 1028 1041 0 3262
UNTRUSTED_RECTANGLE= 2068 2081 0 3263
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE EIGER2 9M DETECTOR
UNTRUSTED_RECTANGLE= 0 3109 512 551
UNTRUSTED_RECTANGLE= 0 3109 1062 1101
UNTRUSTED_RECTANGLE= 0 3109 1612 1651
UNTRUSTED_RECTANGLE= 0 3109 2162 2201
UNTRUSTED_RECTANGLE= 0 3109 2712 2751
eof
elif [ "$NX" == "4150" -a "$NY" == "4371" ]; then
# Eiger 16M
cat >> XDS.INP << eof
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE EIGER 16M DETECTOR + ONE PIXEL ON EACH SIDE
UNTRUSTED_RECTANGLE= 0 4150 513 553
UNTRUSTED_RECTANGLE= 0 4150 1064 1104
UNTRUSTED_RECTANGLE= 0 4150 1615 1655
UNTRUSTED_RECTANGLE= 0 4150 2166 2206
UNTRUSTED_RECTANGLE= 0 4150 2717 2757
UNTRUSTED_RECTANGLE= 0 4150 3268 3308
UNTRUSTED_RECTANGLE= 0 4150 3819 3859
!EXCLUSION OF VERTICAL DEAD AREAS OF THE EIGER 16M DETECTOR + ONE PIXEL ON EACH SIDE
UNTRUSTED_RECTANGLE= 1029 1042 0 4371
UNTRUSTED_RECTANGLE= 2069 2082 0 4371
UNTRUSTED_RECTANGLE= 3109 3122 0 4371
eof
elif [ "$NX" == "4148" -a "$NY" == "4362" ]; then
# Eiger2 16M ; v0.97 numbers from Andreas Förster
cat >> XDS.INP << eof
!EXCLUSION OF HORIZONTAL DEAD AREAS OF THE EIGER2 16M DETECTOR
UNTRUSTED_RECTANGLE= 1028 1041 0 4363
UNTRUSTED_RECTANGLE= 2068 2081 0 4363
UNTRUSTED_RECTANGLE= 3108 3121 0 4363
!EXCLUSION OF VERTICAL DEAD AREAS OF THE EIGER2 16M DETECTOR
UNTRUSTED_RECTANGLE= 0 4149 512 551
UNTRUSTED_RECTANGLE= 0 4149 1062 1101
UNTRUSTED_RECTANGLE= 0 4149 1612 1651
UNTRUSTED_RECTANGLE= 0 4149 2162 2201
UNTRUSTED_RECTANGLE= 0 4149 2712 2751
UNTRUSTED_RECTANGLE= 0 4149 3262 3301
UNTRUSTED_RECTANGLE= 0 4149 3812 3851
eof
fi
fi
# Mechanism to append detector-specific parameters without editing this file:
# TODO: some detectors don't set DET_SN so this is not always unique
test "$DET_SN" != "" && DET="${DET}_$DET_SN"
DET=$(echo $DET | sed 's/ /_/g;s/\W//g;')
file="$HOME/.xds-site/$DET"
if [ -f $file ]; then
echo Appending site parameters from: $file
echo "! Parameters from $file" >> XDS.INP
echo "Site parameters:"
cat $file
echo
# Only FRACTION_POLARIZATION and ROTATION_AXIS are commented out automatically because they
# are the most likely to not match defaults
# Also likely adjustments are UNTRUSTED regions and maybe SILICON, but those don't replace existing parameters
# Create a pattern like "XX\|YY" to search overriden parameters.
pattern=$(grep "POLARIZATION\|ROTATION_AXIS\|TRUSTED_REGION" $file | \
awk 'match($0,/^ *(\w+) *=/,a){x=x"\\|"a[1];}END{print substr(x,3);}')
if [ "$pattern" != "" ]; then
sed 's/\(^ *\('$pattern'\) *=\)/!!\1/;' XDS.INP >tmp1
mv tmp1 XDS.INP
echo "Overridden parameters:"
grep "^!!*$pattern" XDS.INP
echo
fi
cat $file >> XDS.INP
else
echo "Detector specific parameters can be placed in: $file"
echo "! Detector specific parameters can be placed in:" >> XDS.INP
echo "! $file" >> XDS.INP
echo "! FRACTION_OF_POLARIZATION, ROTATION_AXIS and TRUDTED_REGION will auto-comment the replaced parameters" >> XDS.INP
fi
echo XDS.INP is ready for use. The file has only the most important keywords.
echo Full documentation, including complete detector templates, at xds.mr.mpg.de .
echo More documentation in strucbio.biologie.uni-konstanz.de/xdswiki/index.php .
echo After running xds, inspect at least the agreement of predicted and observed
echo spots in FRAME.cbf!
rm -f tmp1 tmp2
System-wide or personal installation
Ask your system adminstrator to cut-and-paste the script into e.g. /usr/local/bin/generate_XDS.INP, and to make it "executable".
If you work with Eiger data, you may want to make a one-line change to the script after downloading, in order to point to the correct path on your system of the Dectris' Neggia library, or the Durin plugin, respectively. Just open the script with an editor and adjust neggia_path or durin_path ! This relieves users from having to change the LIB= line for every data set. You should also insert that path into the Menu / Settings / "generic library" in XDSGUI .
But you may also cut-and-paste the script from this webpage into a file in e.g. your home directory; the filename should be generate_XDS.INP. After creating the file, make it executable - e.g. if it's in your $HOME, use:
chmod +x ~/generate_XDS.INP
After that, you can just run it in a similar way as if it were installed in your $PATH:
~/generate_XDS.INP "frms/mydata_1_???.img"
By using your own file, you can easily update to the latest revision, or even change the script, without having to bother the system administrator.
See also Generate_XDS.INP#Dependencies below, and the Installation article.
Copying generate_XDS.INP from XDSwiki webserver
On Linux:
wget https://strucbio.biologie.uni-konstanz.de/pub/linux_bin/generate_XDS.INP chmod a+x generate_XDS.INP
On Mac:
curl -o generate_XDS.INP https://strucbio.biologie.uni-konstanz.de/pub/linux_bin/generate_XDS.INP chmod a+x generate_XDS.INP
See also Installation.
Obtaining generate_XDS.INP from this webpage
Instead of cutting-and-pasting the lines of the script, you (or the system administrator) could just cut-and-paste the following four lines
wget http://strucbio.biologie.uni-konstanz.de/xdswiki/index.php/generate_XDS.INP -O - | \ sed -e s/\ \;/\ /g -e s/\>\;/\>/g -e s/\<\;/\</g -e s/amp\;//g -e s/\"\;/\"/g -e s/\&\#\1\6\0\;/\ /g | \ sed '/# end of generate_XDS.INP/,$d' | awk '/^#/,/rm -f tmp1 tmp2/' > generate_XDS.INP chmod +x generate_XDS.INP
to copy the script from this website into an executable file generate_XDS.INP in your current directory. On a Mac (which does not seem to have wget), one could try
curl -L -o - http://strucbio.biologie.uni-konstanz.de/xdswiki/index.php/generate_XDS.INP | \ sed -e s/\ \;/\ /g -e s/\>\;/\>/g -e s/\<\;/\</g -e s/amp\;//g -e s/\"\;/\"/g -e s/\&\#\1\6\0\;/\ /g | \ sed '/# end of generate_XDS.INP/,$d' | awk '/^#/,/rm -f tmp1 tmp2/' > generate_XDS.INP chmod +x generate_XDS.INP
If you do use cut-and-paste from the webpage, be aware of the following problem report: On the Mac, after loading frames, by clicking “generate XDS.INP”, the program gives some strange symbol “Ô in XDS.INP. And the more you click “save” button, the more “Ô appear. This looks like e.g.
SPACE_GROUP_NUMBER=0 Ã ! 0 if unknown
UNIT_CELL_CONSTANTS= 70 80 90 90 90 90 Ã
The problem is due to the “Rich text” format in TextEdit when saving "generate_XDS.INP". It is solved by re-downloading the script, and changing format to Plain - everything should work then.
Attention beamline staff: it would be great if you could make a one-line change to the script after downloading, in order to point to the correct path to Dectris' Neggia library, or the Durin plugin, respectively. Just open the script with an editor and adjust neggia_path or durin_path ! This relieves users from having to change the LIB= line for every data set.
Calling generate_XDS.INP from a Python script
It is recommended to use the subprocess.Popen() module instead of os.system():
subprocess.Popen(["generate_XDS.INP",imagepath],stdout=outputfile)
where imagepath is a string containing the path to an image and outputfile is either a chosen variable for an output file or subprocess.PIPE if you're not interested in the output of the script.
The module os.system() internally uses /bin/sh to execute the command and overrides #!/bin/bash at the beginning of the script. While this is not a problem on most operating systems, /bin/sh points to dash instead of bash on Ubuntu, which leads to a program crash with the error message
sh: 1: Syntax error: Bad fd number
Dependencies
The script makes use of many GNU commands, like ls, grep, egrep, awk, cut, cat, echo, wc, bc, head, sed, tail, cp, od, python. Some of them (like od and python) are only used in case of specific detectors (MarCCD and RAXIS, respectively).
The script will only work if all the required commands are available. They reside in either the coreutils RPM, or specific RPMs (gawk, sed, bc, grep, python ...). Please note that to get the strings command on some Linux distributions (e.g. FC23) you need to install the binutils RPM package.
For Eiger data processing, the h5dump program must be installed. This is part of hdf5-tools (Ubuntu) or hdf5 (RHEL). The .h5 files collected at Diamond Light Source require a very new version of h5dump (namely h5dump 1.10) to extract the OVERLOAD parameter from the .h5 file; this version is available by default in Ubuntu 20.04 and RHEL/CentOS 8.
On Mac OS X, installation of the "Command Line Tools" (from http://developer.apple.com/downloads; requires Apple ID) is required (open a terminal and type xcode-select --install). These are also part of the (larger, but also free) Xcode package. This package comes with a license that has to be accepted by the user when running a Command Line Tool (e.g. strings) for the first time.
One way to check for missing programs is
#!/bin/bash
for i in ls grep egrep awk cut cat echo wc bc head sed tail cp od python strings h5dump ; do
if [ ! -x /bin/$i ] && [ ! -x /usr/bin/$i ]; then
echo $i not found
fi
done
A command that should go a long way in providing all these tools for RedHat-derived distros is (as root)
yum -y install coreutils binutils gawk sed bc grep python hdf5
and for Ubuntu this would be (untested!)
sudo apt-get install coreutils binutils gawk sed bc grep python hdf5-tools
See also Installation.
Limitations
- The script tries to interpret the header of the frames, so is currently limited to Dectris (Pilatus, Eiger), ADSC (Quantum), Rigaku (several types), MAR (CCD and image plate) detectors, and one Bruker detector. Other detectors need some values to be manually filled into XDS.INP - the relevant places are marked with XXX. These are detector properties (type, pixel size and number, min and max counts in a pixel), and experimental parameters like ROTATION_AXIS, OSCILLATION_RANGE, X-RAY_WAVELENGTH, DETECTOR_DISTANCE, and XORG, YORG. For fine-tuning of detector parameters, see the detector-specific templates.
- The authors have made a "best effort" to provide a XDS.INP that results in the correct sign of the anomalous signal. In the case of one detector type (internally called Rigaku SMV) this requires reversal of one detector axis, and a negative DETECTOR_DISTANCE, as is found in some of the detector-specific templates. For an unusual or unknown detector setup, the correct sign of the anomalous signal needs to be established and verified e.g. with a good dataset from a test crystal that has an anomalous signal. The authors do not take any responsibility for problems arising from incorrect sign of the anomalous signal, nor - obviously! - for any other mischief arising in or from data processing.
- At some beamlines, the ROTATION_AXIS should be -1 0 0 ("backwards") instead of the usual 1 0 0 ("horizontal"), or even 0 1 0 ("vertical") like at one of the PETRA Hamburg BLs. The frame headers do not have this information, so the default chosen by generate_XDS.INP may be wrong and need manual correction. Pls also see the article Beamline notes.
- Sometimes, the x- and y- values of the primary beam position recorded in the header should be used for ORGY and ORGX (i.e reversed) instead of as ORGX and ORGY. For ADSC, this has been implemented in the script for a number of beamlines.
- there are apparently several flavours of HDF5 files produced at Diamond Light Source. They differ e.g. in the naming of the header items. This means that items like NX, NY, DETECTOR_DISTANCE and number of images cannot always be determined by the generate_XDS.INP script. Example: The data at /dls/i04-1/data/2021/mx28114-9/processing/Lenye_Diamini/ThiL/ThiL found during the CCP4 2021 online Cape Town workshop. A workaround is to use e.g. xia2 pipeline=3dii to process these files, and - if needed - extract those items from its output files, e.g. from DEFAULT/NATIVE/SWEEP1/index/XDS.INP .
See also
- GlobalPhasing's list of beamlines and their settings is at http://www.globalphasing.com/autoproc/wiki/index.cgi?BeamlineSettings .
- Beamline notes to collect information about specific settings
- spot2pdb for visualizing reciprocal space